Doepfer

hi Dieter, thanks again for that

I've now obtained the hardware sockets to bring those Dark Energy
jumpers out of the box.

Any chance you could help to fill in some gaps?

Problem I now have is that it's not always clear which pin to attach to.
The docs often only tell which pairs of pins have to be connected, not
which is which.

I'm looking at

JP6.. apply CV to mix between osc and ext.   ..which pin to use?

JP7.. 2 pins are LFO1 o/p and Inverter Input ..which is which? 

JP8.. 2 pins are Inverter o/p and to the LFO1bar socket on the top panel, ...which is which?


Any hints gratefully accepted.

For interest, my plan is to add 5 sockets:

Outputs
1. ADSR
2. LFO1
3. LFO2

Inputs 
1. Inverter (normalled to LFO1)
2. VCO/ext Mix

The existing LFO1bar  Output on the top panel will function
as before unless the Inverter input socket is used.


best regards

andy butler



yahoo@doepfer.de wrote:
>> The question on my mind is whether it is a switch, or a continuous
>> controller.
> 
> It's not a switch but a continuous controller (a bit like the A-134 when
> used as crossfader or input panner).
> 
> Best wishes
> Dieter Doepfer
> 
> 
> 
> 
> ------------------------------------
>