Doepfer

> Hi all/Dieter
>
> I have a module that puts out voltages in the range 0 to +4V. I
> would like to offset and amplify this voltage range to -4 to +4V
> (that is amplify x2 and offset by -4V).
>
> Is this the right module to do this job?
>
> Thanks
>
> Richard

Yes, but you have to change the position of the JP3 jumper. The factory
setting is 0...+5V offset (upper position of the jumper). You have to change
it to the lower position (-5V...+5V offset).

Best wishes
Dieter Doepfer