Doepfer

yahoo@doepfer.de wrote:
>>> The pin of JP6 can be used also to apply a voltage in the
>>> range -5V...GND...+5V to adjust the relation between internal VCO and
>>> external signal (GND = same level, -5V VCO only, +5V external
>> signal only).
>>> If a jumper is put on JP6 -5V are applied (i.e. VCO only).
>> so what happens for a voltage of, for instance
>>
>> -2.5V
>> +2.5V
> 
> A CV change from -5V...+5V causes a change in the relation between the
> internal VCO and the external signal (voltage controller input panning).

Sure, that much is evident from the original post.

The question on my mind is whether it is a switch, or a continuous
controller.

Hence the otherwise bizarre seeming use of the 2.5V & -2.5V voltages
as examples as to what wasn't clear ;-)

andy

> 
> Best wishes
> Dieter Doepfer
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
> 
>