Doepfer

yahoo@doepfer.de wrote:
>  
> 
>  > Is there anything you'd recommend as a way to *reduce* the level
>  > of the oscillator, in that situation or otherwise?
>  >
>  > andy butler
> 
> You may simply turn it off.

figured that :-)

Also I found it's more or less possible to adjust the value 
of the the pulse width near to the "off" position.


> If you want to adjust the relation please refer
> to the additional technical documents on our website:
> 
> www.doepfer.com > PRODUCTS > DARK ENERGY >
> Dark_Energy_technical_information.pdf
> 
> The pin of JP6 can be used also to apply a voltage in the
> range -5V...GND...+5V to adjust the relation between internal VCO and
> external signal (GND = same level, -5V VCO only, +5V external signal only).
> If a jumper is put on JP6 -5V are applied (i.e. VCO only).

so what happens for a voltage of, for instance

-2.5V 
+2.5V

?

> 
> Best wishes
> Dieter Doepfer

many thanks
andy butler



> 
>