Doepfer

Thanks a lot for the info Bakis & Florian !

Martin

--- In Doepfer_a100@yahoogroups.com, Florian Anwander <fanwander@...> wrote:
>
> Hi Martin
>   > Will the internal CV automatically be bypassed if I plug something 
> into the CV1 jack on the A-110?
> Yes for newer moduls. As far as I remember the first series of A110s 
> (from 1996) did not use the normalling switch contact of the CV, but had 
> a soldered wire jumper (this jumper still exists in the later series, 
> but the socket contacts are no longer short connected).
> If buy a used VCO, you should have a look at this. The version number is 
> printed on the pcb like "A110 VCO copyright 1997 V3" (upper half about 
> at the height of the tune potentiometer)
> 
> 
> > Same question goes for internal gate. Will plugging something else into the gate jack on the A-140 ADSR bypass the internal gate for this module?
> yes.
> 
> Florian
>