Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Thread

Re: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!

Re: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!

2006-11-03 by Walt Mucha

First thing is do a nozzle check to make sure all the jets are firing. If that's ok then make sure your QTR settings are correct. You may have selected the wrong toning combination or the percentages could be set wrong.

Walt
Show quoted textHide quoted text
>-----Original Message-----
>From: sagaface [mailto:sagaface@...]
>Sent: Thursday, November 2, 2006 12:22 PM
>To: DigitalBlackandWhiteThePrint@yahoogroups.com
>Subject: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!
>
>Hello all...
>
>This question might belong in the QTR forum but it just doesn't get as much rraffic and 
>"im desperate for a suggestion quickly.
>
>I normally print BO on my 2200 but need to use QTR for some prints. Normally this is no 
>issue. However my prints are coming out with a pronounced cyan cast. I though perhaps I 
>had forgotten about a magenta cart I may have reset because I know Epson carts say they 
>are empty before they actaully are and I wanted to squeeze another print or two out of it. I 
>wasn't sure which one it might be so I replaced both the M and LM carts. Still the same 
>cyan cast.
>
>All the other ink levels are fine. Any suggestions?
>
>Thanks...under the gun here....figures!
>Sarah
>
>
>
>
>Please visit the Group Homepage to check the Files, and other resources as they are often being updated.
>
>http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
>If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.
>
>Please follow these basic guidelines:
>- As threads develop, trim off excess portions of earlier messages to keep them short.
>- Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice.
>- Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership.
>- By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See “Group Topic, Rules and Guidelines” in the Files section:
>http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
>
>BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE “OWNER” AND “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  “OWNER” AND “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
> 
>Yahoo! Groups Links
>
>
>
>
>

Re: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!

2006-11-03 by sagaface

Walt, thanks! I didn't even think about a nozzle check...there's no LK at all...that must have 
been the cart I reset. Though I'm a bit surprised that would cause such a huge cyan cast. 
Does that make sense to you?

Thanks again,
Sarah


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Walt Mucha" <wkm@...> wrote:
>
> First thing is do a nozzle check to make sure all the jets are firing. If that's ok then make 
sure your QTR settings are correct. You may have selected the wrong toning combination 
or the percentages could be set wrong.
> 
> Walt
> 
> >-----Original Message-----
> >From: sagaface [mailto:sagaface@...]
> >Sent: Thursday, November 2, 2006 12:22 PM
> >To: DigitalBlackandWhiteThePrint@yahoogroups.com
> >Subject: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!
> >
> >Hello all...
> >
> >This question might belong in the QTR forum but it just doesn't get as much rraffic 
and 
> >"im desperate for a suggestion quickly.
> >
> >I normally print BO on my 2200 but need to use QTR for some prints. Normally this is 
no 
> >issue. However my prints are coming out with a pronounced cyan cast. I though 
perhaps I 
> >had forgotten about a magenta cart I may have reset because I know Epson carts say 
they 
> >are empty before they actaully are and I wanted to squeeze another print or two out of 
it. I 
> >wasn't sure which one it might be so I replaced both the M and LM carts. Still the same 
> >cyan cast.
> >
> >All the other ink levels are fine. Any suggestions?
> >
> >Thanks...under the gun here....figures!
> >Sarah
> >
> >
> >
> >
> >Please visit the Group Homepage to check the Files, and other resources as they are 
often being updated.
> >
> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> >
> >If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, 
please edit your Membership preferences by visiting this same page.
> >
> >Please follow these basic guidelines:
> >- As threads develop, trim off excess portions of earlier messages to keep them short.
> >- Good manners are required at all time. No personal attacks or flames. Hostile, 
aggressive or argumentative users may be removed from the membership without notice.
> >- Keep your posts and threads related to the group topic of digital B&W printing. Users 
who persistently make off-topic posts may be removed from the membership.
> >- By posting on this forum you agree to abide by the group rules and guidelines, and 
to abide by the actions and decisions of the group Owner and Moderators. See "Group 
Topic, Rules and Guidelines" in the Files section:
> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> >
> >BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT 
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND 
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY 
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, 
USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND "MODERATORS" OF 
DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE 
PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR 
TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE 
DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE 
DIGITAL BW, THE PRINT YAHOO GROUP.
Show quoted textHide quoted text
> > 
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
>

Re: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!

2006-11-03 by Tom Baker

The LK is very warm.  So, if it's not there the opposite will dominate.  That's the blue/cyan.
   
  Tom Baker

sagaface <sagaface@...> wrote:
          Walt, thanks! I didn't even think about a nozzle check...there's no LK at all...that must have 
been the cart I reset. Though I'm a bit surprised that would cause such a huge cyan cast. 
Does that make sense to you?

Thanks again,
Sarah

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Walt Mucha" <wkm@...> wrote:
>
> First thing is do a nozzle check to make sure all the jets are firing. If that's ok then make 
sure your QTR settings are correct. You may have selected the wrong toning combination 
or the percentages could be set wrong.
> 
> Walt
> 
> >-----Original Message-----
> >From: sagaface [mailto:sagaface@...]
> >Sent: Thursday, November 2, 2006 12:22 PM
> >To: DigitalBlackandWhiteThePrint@yahoogroups.com
> >Subject: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!
> >
> >Hello all...
> >
> >This question might belong in the QTR forum but it just doesn't get as much rraffic 
and 
> >"im desperate for a suggestion quickly.
> >
> >I normally print BO on my 2200 but need to use QTR for some prints. Normally this is 
no 
> >issue. However my prints are coming out with a pronounced cyan cast. I though 
perhaps I 
> >had forgotten about a magenta cart I may have reset because I know Epson carts say 
they 
> >are empty before they actaully are and I wanted to squeeze another print or two out of 
it. I 
> >wasn't sure which one it might be so I replaced both the M and LM carts. Still the same 
> >cyan cast.
> >
> >All the other ink levels are fine. Any suggestions?
> >
> >Thanks...under the gun here....figures!
> >Sarah
> >
> >
> >
> >
> >Please visit the Group Homepage to check the Files, and other resources as they are 
often being updated.
> >
> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> >
> >If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, 
please edit your Membership preferences by visiting this same page.
> >
> >Please follow these basic guidelines:
> >- As threads develop, trim off excess portions of earlier messages to keep them short.
> >- Good manners are required at all time. No personal attacks or flames. Hostile, 
aggressive or argumentative users may be removed from the membership without notice.
> >- Keep your posts and threads related to the group topic of digital B&W printing. Users 
who persistently make off-topic posts may be removed from the membership.
> >- By posting on this forum you agree to abide by the group rules and guidelines, and 
to abide by the actions and decisions of the group Owner and Moderators. See "Group 
Topic, Rules and Guidelines" in the Files section:
> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> >
> >BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT 
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND 
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY 
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, 
USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND "MODERATORS" OF 
DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE 
PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR 
TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE 
DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE 
DIGITAL BW, THE PRINT YAHOO GROUP.
> > 
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
>



         


[Non-text portions of this message have been removed]

Re: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!

2006-11-03 by Walt Mucha

Yup. It's a warm color black and when it's not working, cooler colors (cyan, lt. cyan), will dominate.  

Walt
Show quoted textHide quoted text
>-----Original Message-----
>From: sagaface [mailto:sagaface@...]
>Sent: Thursday, November 2, 2006 03:13 PM
>To: DigitalBlackandWhiteThePrint@yahoogroups.com
>Subject: Re: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!
>
>Walt, thanks! I didn't even think about a nozzle check...there's no LK at all...that must have 
>been the cart I reset. Though I'm a bit surprised that would cause such a huge cyan cast. 
>Does that make sense to you?
>
>Thanks again,
>Sarah
>
>
>--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Walt Mucha" <wkm@...> wrote:
>>
>> First thing is do a nozzle check to make sure all the jets are firing. If that's ok then make 
>sure your QTR settings are correct. You may have selected the wrong toning combination 
>or the percentages could be set wrong.
>> 
>> Walt
>> 
>> >-----Original Message-----
>> >From: sagaface [mailto:sagaface@...]
>> >Sent: Thursday, November 2, 2006 12:22 PM
>> >To: DigitalBlackandWhiteThePrint@yahoogroups.com
>> >Subject: [Digital BW] Help!!! Prints due tomorrow and my 2200 is wacked!!
>> >
>> >Hello all...
>> >
>> >This question might belong in the QTR forum but it just doesn't get as much rraffic 
>and 
>> >"im desperate for a suggestion quickly.
>> >
>> >I normally print BO on my 2200 but need to use QTR for some prints. Normally this is 
>no 
>> >issue. However my prints are coming out with a pronounced cyan cast. I though 
>perhaps I 
>> >had forgotten about a magenta cart I may have reset because I know Epson carts say 
>they 
>> >are empty before they actaully are and I wanted to squeeze another print or two out of 
>it. I 
>> >wasn't sure which one it might be so I replaced both the M and LM carts. Still the same 
>> >cyan cast.
>> >
>> >All the other ink levels are fine. Any suggestions?
>> >
>> >Thanks...under the gun here....figures!
>> >Sarah
>> >
>> >
>> >
>> >
>> >Please visit the Group Homepage to check the Files, and other resources as they are 
>often being updated.
>> >
>> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>> >
>> >If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, 
>please edit your Membership preferences by visiting this same page.
>> >
>> >Please follow these basic guidelines:
>> >- As threads develop, trim off excess portions of earlier messages to keep them short.
>> >- Good manners are required at all time. No personal attacks or flames. Hostile, 
>aggressive or argumentative users may be removed from the membership without notice.
>> >- Keep your posts and threads related to the group topic of digital B&W printing. Users 
>who persistently make off-topic posts may be removed from the membership.
>> >- By posting on this forum you agree to abide by the group rules and guidelines, and 
>to abide by the actions and decisions of the group Owner and Moderators. See "Group 
>Topic, Rules and Guidelines" in the Files section:
>> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
>> >
>> >BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT 
>YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND 
>"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU 
>FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY 
>DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, 
>USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND "MODERATORS" OF 
>DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH 
>DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE 
>PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR 
>TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE 
>DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE 
>DIGITAL BW, THE PRINT YAHOO GROUP.
>> > 
>> >Yahoo! Groups Links
>> >
>> >
>> >
>> >
>> >
>>
>
>
>
>
>
>Please visit the Group Homepage to check the Files, and other resources as they are often being updated.
>
>http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
>If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.
>
>Please follow these basic guidelines:
>- As threads develop, trim off excess portions of earlier messages to keep them short.
>- Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice.
>- Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership.
>- By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See “Group Topic, Rules and Guidelines” in the Files section:
>http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
>
>BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE “OWNER” AND “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  “OWNER” AND “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
> 
>Yahoo! Groups Links
>
>
>
>
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.