Digital BW, The Print

I have installed the Rip as per instuctions on my OsX system and installed the 
Quadtone 2200 printer. The problem is that my "normal" 2200 printers fail to print. 
The print center shows the 2200 as "Stopped" If I restart it after a few seconds or 
showing "running" the printer shows as Stopped again. The printer does not do 
anything. 
I am new to Mac and I would appreciate any help. I have downloaded the latest epson 
drivers and installed them as per instructions. I assume that I should try to re-install 
them, but I do not know how to do this. 
As I wrote earlier, it prints ok as a Quadtone 2200!

Thanks,

Barry

Don't worry about this,  I re-installed the drivers and it now works...

Barry

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "flyfishingusa2002" 
<tflyfish@c...> wrote:
> I have installed the Rip as per instuctions on my OsX system and installed the 
> Quadtone 2200 printer. The problem is that my "normal" 2200 printers fail to print. 
> The print center shows the 2200 as "Stopped" If I restart it after a few seconds or 
> showing "running" the printer shows as Stopped again. The printer does not do 
> anything. 
> I am new to Mac and I would appreciate any help. I have downloaded the latest 
epson 
> drivers and installed them as per instructions. I assume that I should try to re-
install 

> them, but I do not know how to do this. 
> As I wrote earlier, it prints ok as a Quadtone 2200!
> 
> Thanks,
> 
> Barry

I get this from time to time (particularly if I swap the mk and pk blacks).  You may not 
have to reinstall the driver if it happens again.  Next time try going to print center 
(under utilities) and simply delete and then re-add the Epson 2100 as a printer.


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "flyfishingusa2002" 
<tflyfish@c...> wrote:
> 
> Don't worry about this,  I re-installed the drivers and it now works...
> 
> Barry
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "flyfishingusa2002" 
> <tflyfish@c...> wrote:
> > I have installed the Rip as per instuctions on my OsX system and installed the 
> > Quadtone 2200 printer. The problem is that my "normal" 2200 printers fail to 
print. 

> > The print center shows the 2200 as "Stopped" If I restart it after a few seconds or 
> > showing "running" the printer shows as Stopped again. The printer does not do 
> > anything. 
> > I am new to Mac and I would appreciate any help. I have downloaded the latest 
> epson 
> > drivers and installed them as per instructions. I assume that I should try to re-
> install 
> > them, but I do not know how to do this. 
> > As I wrote earlier, it prints ok as a Quadtone 2200!
> > 
> > Thanks,
> > 
> > Barry