Digital BW, The Print

From: nigglefish <nigglefish@...>
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Sent: Mon, April 4, 2011 10:48:02 PM
Subject: [Digital BW] Getting rid of ejection rollers

  
I have an EPSON TX650 and was wondering if anyone had any experience removing 
the pin-wheel ejection rollers from this model. I would ideally like to remove 
all but the far left and right rollers so that I could feed through A4 paper 
with only ejection roller marks in 2cm left and right margins. Of course I would 
only be able to print on A4 after that. But even getting to the rollers is 
proving difficult. Does anyone have any experience doing this and any 
suggestions on how I might do it in a way that could be reversed at a later 
time? Would doing this leave enough ejection rollers to print to the bottom of 
the page (or within 2cm of it)? At the moment if I prop up all of the ejection 
rollers the printer messes up 4cm from the bottom of the page. 


OK, so no-one has ever heard of my printer. It's not available in the US and is 
known as a PX650 or RX650 elsewhere. It's a descendant of the R260 I think. If 
anyone has any experience with any cheap Epson photo printers I would be very 
grateful.

Also I was thinking of upgrading to a 1410 (same as the 1400) does anyone have 
experience getting rid of ejection roller marks on this printer?

Cheers,
Nigel.




[Non-text portions of this message have been removed]

>
> Nigel,
> 
> Take a look at teh Epson Printers Yahoo group. Art is the resident Epson guru of 
> the group and should be able to assist you.
> 
> Phil
> 
> 
> 
> 
> ________________________________
> From: nigglefish <nigglefish@...>
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Sent: Mon, April 4, 2011 10:48:02 PM
> Subject: [Digital BW] Getting rid of ejection rollers
> 
> Â  
> I have an EPSON TX650 and was wondering if anyone had any experience removing 
> the pin-wheel ejection rollers from this model. I would ideally like to remove 
> all but the far left and right rollers so that I could feed through A4 paper 
> with only ejection roller marks in 2cm left and right margins. Of course I would 
> only be able to print on A4 after that. But even getting to the rollers is 
> proving difficult. Does anyone have any experience doing this and any 
> suggestions on how I might do it in a way that could be reversed at a later 
> time? Would doing this leave enough ejection rollers to print to the bottom of 
> the page (or within 2cm of it)? At the moment if I prop up all of the ejection 
> rollers the printer messes up 4cm from the bottom of the page. 
> 
> 
> OK, so no-one has ever heard of my printer. It's not available in the US and is 
> known as a PX650 or RX650 elsewhere. It's a descendant of the R260 I think. If 
> anyone has any experience with any cheap Epson photo printers I would be very 
> grateful.
> 
> Also I was thinking of upgrading to a 1410 (same as the 1400) does anyone have 
> experience getting rid of ejection roller marks on this printer?
> 
> Cheers,
> Nigel.
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>

From: nigglefish <nigglefish@...>
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Sent: Tue, April 5, 2011 5:58:48 PM
Subject: Re: [Digital BW] Getting rid of ejection rollers

  
Thanks Phil,

I am so used to using this forus to answer all my BW printing questions that I 
didn't realise my question actually had nothing to do with BW printing in 
particular.

Cheers,
Nigel.

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Phillip Kimble 
<grimmieoldfart@...> wrote:
>
> Nigel,
> 
> Take a look at teh Epson Printers Yahoo group. Art is the resident Epson guru 
>of 
>
> the group and should be able to assist you.
> 
> Phil
> 
> 
> 
> 
> ________________________________
> From: nigglefish <nigglefish@...>
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Sent: Mon, April 4, 2011 10:48:02 PM
> Subject: [Digital BW] Getting rid of ejection rollers
> 
> Â  
> I have an EPSON TX650 and was wondering if anyone had any experience removing 
> the pin-wheel ejection rollers from this model. I would ideally like to remove 

> all but the far left and right rollers so that I could feed through A4 paper 
> with only ejection roller marks in 2cm left and right margins. Of course I 
>would 
>
> only be able to print on A4 after that. But even getting to the rollers is 
> proving difficult. Does anyone have any experience doing this and any 
> suggestions on how I might do it in a way that could be reversed at a later 
> time? Would doing this leave enough ejection rollers to print to the bottom of 

> the page (or within 2cm of it)? At the moment if I prop up all of the ejection 

> rollers the printer messes up 4cm from the bottom of the page. 
> 
> 
> OK, so no-one has ever heard of my printer. It's not available in the US and is 
>
> known as a PX650 or RX650 elsewhere. It's a descendant of the R260 I think. If 

> anyone has any experience with any cheap Epson photo printers I would be very 
> grateful.
> 
> Also I was thinking of upgrading to a 1410 (same as the 1400) does anyone have 

> experience getting rid of ejection roller marks on this printer?
> 
> Cheers,
> Nigel.
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>




[Non-text portions of this message have been removed]