Digital BW, The Print

Chris,

Don't have a 2400 so can't give you step by step, but what I can say is that
in these situations I do a simple test print the same size as I plan to
print but with just the 4 corners marked out on the print and then I test
print on some cheap, maybe plain paper of the right size to make sure I have
the correct settings. Its quick simple and cheap.

Mike


On 12/12/2007, namibiajohnston <chris@...> wrote:
>
>   Would someone take a moment and run me step by step through the
> printing process for a 13 x 36 inch or mm/cm equivalent panorama off
> a roll? I'm trying to print 6 elephants racing towards a water hole
> in B & W!
>
> I have made a couple of aborted efforts, on chopped off both ends
> and the other two printed off center and only partially.
> In the Print window I select roll not manual roll, manual roll is
> for a feed through the front?
> Do I use the banner or cut sheet mode?
> If I use Banner do I tick "save roll paper option?"
> If I use Cut sheet mode do I tick "print page frame option?"
> I have to set the custom page size; I can either use 0.01cm or
> 0.01in,
> Does 13 inches become 1300 inches and 36 inches become 3600 inches?
>
> I really could use a step by step how to here, papers too expensive
> to keep making mistakes�.
>
> Many thanks from Namibia
>
> 
>


[Non-text portions of this message have been removed]