Digital BW, The Print

This does not sound like a clog.  It may be that the printer has reached the
mandatory service point where it just shuts off.  On the other hand, I think
the lights usually flash when that point is reached.  The printer manual may
have a trouble shooting section that will tell you.  If the OEM carts are
also not recognized, something serious could be wrong with the printer.

 

Paul

www.PaulRoark.com <http://www.paulroark.com/>  

 

 

  _____  

From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of Nancy
Wilson
Sent: Friday, November 30, 2007 12:15 PM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: [Digital BW] Is this a clog? 2200 won't recognize MIS UT7 inks . .
.

 

As the light still shows red when I put in a new cartridge, I am 
wondering if this is one of the famouse 2200 clogs. How do I get rid 
of it if it can't run a cleaning cycle?

Nancy
>
> I have been using MIS ebony ink in the B position for some time and 
now 
> the full set of UT7 inks. My 2200 stopped recognizing first the MIS 
> replacement for the magenta ink, so I switched the OEM magenta for a 
> few draft jobs. Now I am trying to print a good B&W and the printer 
> won't recognize the MIS Ebony (two different cartridges) nor any of 3 
> different OEM PK or K cartricges. I am unable to run a cleaning 
> cycle. Any HELP suggestions would be appreciated. Do I have to 
throw 
> out this printer? I am just totally frustrated!
>

 



[Non-text portions of this message have been removed]