Digital BW, The Print

an great
> vacuum when loading the ink.  It may be that using a bottom fill
adapter and
> pulling a bit of ink out the outlet to "prime" the cartridge would
work.  Of
> course, it would also waste some ink.  I always prime the new carts
I load
> from the top because air is always trapped just above the outlet. 
Once the
> cart have been primed once, 


Paul

So it sounds like I need to buy some loader stuff.

So is the bottom or top loader thing you mention available?  Where?
MIS or do I need a syringe?  

MIS tech suggested an ink flow problem.  Check vent holes, did that. 
On the Piezo site in their FAQ they mention keeping the ink pad clean
and tell you how to clean it so the heads stay moist when parked, did
that too.

Ink feed makes sense but on every cart? Every time? 

While doing all this ink wasting trying to get a clean check for all 7
carts the yellow went low last night.  Guess what. I installed a new
one and got a nearly clear check from that cart.  By this morning I
have a 90% complete yellow cart check BUT all the others are good.

How will it work later?  It is 5:49 am.  Will I have 7 good checks at
5:49 pm?  I don't even know.

Thanks Paul

Neil