Digital BW, The Print

Hi Richard

I suspect you mean Cone Split tone K7 rather than MIS?  If that is the case
then it is only suitable for matt papers, hence the smearing on the glossy
ones.  You should find the quality amazing on the right matt papes however.

David Whistance
  -----Original Message-----
  From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of Richard
  Sent: 22 November 2006 23:55
  To: DigitalBlackandWhiteThePrint@yahoogroups.com;
DigitalBlackandWhiteThePrint@yahoogroups.com
  Subject: Re: [Digital BW] MIS SplitTone K7


  I tried it on 3 paper: H PhotoRag, H Fine Arts Pearl and Museo Silver Rag
  and the print on the Silver Rag is astonishing. It has that old slight
  metallic look. Only issue is that it seems to smear a bit on both Silver
  Rag and the Fine Arts Pearl (both with slight glossy surface). Is it a
  matter of letting them dry or should I spray some fixatives? On matt paper
  it is fine.

  At 02:01 PM 11/22/2006, Richard wrote:
  >Jut got that in, and got a used R2200 to go with it. The results seem to
be
  >quite good with QuadTonRIP. One question though is that when I do a
nozzle
  >check, the ink patterns on the 4th and 6th positions are very very light,
  >barely visible. Is this normal?

  // richard (This email is for mailing lists. To reach me directly, please
  use richard at imagecraft.com)



  


[Non-text portions of this message have been removed]