Digital BW, The Print

David,


>... MIS PK, LLK and LK inks and tried them as well ... 
> where there should have been PK in the prints there 
> were empty white blothes ...

Be sure you have perfect nozzle checks.

With MIS carts you have to remove the tab at the top to let air in.  The ink
will not be able to flow out otherwise.

> I'm going to work with the EZW Yellow for now ... 
> There is more of a cold bluish tone ...

The ABW mode controls need to be moved up a bit toward yellow to compensate
for the lack of yellow ink.

In RGB mode, print a solid yellow patch and make sure the resulting print is
on the warm side.  There is some evidence a batch of EZ-Neutral ink might
have been incorrectly labeled as EZ-Warm.

Paul
www.PaulRoark.com