Digital BW, The Print

Thanks Roy,

Nice to know that you don't have to flush the printer.
As I would like to go a little bit warmer (not split tone) than "dead  
neutral" I thought it might be possible to change some of the carts.
The question is which to switch and I suppose I have to do a new  
linearization as well.
Or can you use QTR with the supplied profiles for this purpose?
Have you heard anything about clogging or ink separation problems  
with K6/7 inks?

Thanks,

Hans



6 aug 2006 kl. 16.50 skrev Roy Harrington:

> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Hans & Chia  
> <chiahans@...>
> wrote:
> >
> > Hello,
> >
> > I've decided to load our Stylus Pro 7500 with Piezo K6 and buy it in
> > bottles.
> > However, when looking at the Inkjet Mall site I'm getting a bit
> > confused.
> > I can't find any information which shade to exlude from the K7 inks.
> > K2, K4 or K7 any suggestions?
> >
> > Do we need to flush the printer after only have used MIS UT 1 inks?
> > Any guess when the sepia ink comes in bottles?
> >
> > Thanks,
> >
> > Hans
> >
>
> Hans,
>
> You should leave out the lightest ink K7. It's also important which  
> ink goes
> in which slot (at least if you plan on using QTR with the supplied  
> profiles).
>
> I'd recommend just the Initial Ink Load of the new inks, not  
> flushing the printer
> with cleaning ink. If you switch to sepia you probably have to do  
> this again.
>
> You'd have to ask inkjetmall when the sepia ink will be in bottles.  
> They have the
> inks so it should be just a packaging issue.
>
> Roy
>
>
> 

Atelier Pictoform
Hans Nohlberg & Chia N-L�fqvist
Hed�sgatan 5
SE-412 53 G�teborg
Sweden

+46 (0)31 181414
Mobile: 073 974 44 24

(Bes�k/visit Hed�sgatan 6)

http:/www.pictoform.nu

http:/www.artphotocollection.com
http:/www.etsabild.se
http:/www.hotelartgallery.com





[Non-text portions of this message have been removed]