Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Tom Baker <tbaker1328@...> wrote:
>
> Just put a small piece of tape over the opeing and set them upright in a safe place.  I just 
use a small box for this.
>    
>   It is probably wise to do one or two cleaning cycles when you change the inks out. Then 
you're good to go.  The entire swap process should take about 3-5 minutes.  

Tom,

If you'll indulge me with one more OT question... do you use a special profile or ICC with the 
MIS Pro inks and r220, or just the canned Epson driver and paper profiles?

Thanks again,
Chris