Digital BW, The Print

--- In 
DigitalBlackandWhiteThePrint@yahoogroups.com, "scott_now_coming" 
<scott_now_coming@y...> wrote:
>
> The paper is thick. I'm not sure how thick, but I did have the 
platen 
> gap set to "auto" on the 4800. I don't thick there's that kind of 
> adjustment for the C86.
> 
> I'm sure when the paper is released, Crane will inform the buyer of 
> settings to use.
> 
> Scott


On the C86, you could try the envelope setting (if it has one). And 
on the 4800 try setting it to a higher height, or thicker media as 
opposed to auto. That should cure the micro bands, but it might also 
make the detail slightly fuzzy. Also in the 4800, isn't there a feed 
adjustment setting? You should be able to adjust that so everthing 
lines up better. If it is the same value as the older printers, it 
should be about 1/100 of an inch per number (unless they used metric, 
but I think it is still 1/100 of a unit). That adjustment might even 
be in the driver, as I thought Epson moved it there with the 76/9600 
after may complaints about having to go into the menu to change the 
value.