Digital BW, The Print

Hi Ken;

I'm not too surprised it doesn't work at that size; that leaves you 
with sending it out to a photolab for either dry-mounting or cold-
mounting. I would test a smaller finished print in your dry-mount 
press to see how it responds to the heat-if you use a low-temp RC 
tissue it should work. If it doesn't work, look for a place that 
does cold-mounting-there's an adhesive and a vacuum press involved 
(I think-does anyone else have details on this process?)and I have 
no idea what the archival proerties of the adhesive might be. 
Perhaps Greg or Tyler can give us more details on this, along with 
any other methods available?

Steve Karafyllakis

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "kenseidman" 
<Seidmank@e...> wrote:
>
> I've just mounted my first 24 x 30 inch print onto foamcore using 
the
> tape hinge method.  Results are not satisfactory for this size and
> paper (Kodak Pro Glossy paper).  Ripple is evident.  I've got a dry
> mounting press but it is not large enough for this size print 
(unless
> I try to dry mount in sections, which seems error prone to me ?).
> 
> Any suggestions for other mounting methods for such a large print?
> Thanks,
> Ken
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Steven
> Karafyllakis" <steve@s...> wrote:
> > ...
> > One nice thing about inkjet papers, especially the heavywight, 
is 
> > that you don't need to drymount smaller sizes. Some people hinge 
the 
> > window to the backboard, slip the print in and align it then 
either 
> > tape the corners down or use corner mounts.
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "John 
Kantor" 
> > <jkantor@m...> wrote:
> > >
> > > I'd like to offer mounted fine-art images as one of my 
products, 
> > but I 
> > > don't know much about it. What are the preferred methods for 
> > inkjet 
> > > prints?
> > >
> >
>