Digital BW, The Print

Hi John,

After you read through your manual tonight and post tomorrow, can you 
also answer a couple of questions?

> I am pretty sure this is not the motor itself as it has always 
>worked fine, but rather the connection on the board that makes it 
>buzz like that and finally give the error message.

Does the stepper motor (pump) actually operate intermittently when 
you initialize or does it just start "buzzing"? What error message is 
it giving you -- a "0100" or ?

>...reprogramming the board...requires a special program and a pc, 
>which I do have access to, though not Windows 95 like they mention 
>in the manual...

It doesn't matter whether you have Win95 -- the program runs 
under "DOS mode" anyway, so whatever OS is on the system you borrow 
will be fine, I'm sure.

Replacing the main board may be a lot more grief for you than 
repairing the CN24 connector, if that's where the problem is...

Cheers!
Richard

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "john dean" 
<deanwork2003@y...> wrote:
> Hi Richard,
> 

<< Snipped>>