Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: [Digital BW] My experiences with GLOP and UT7

2005-02-17 by Carl Schofield

Steve,

Prints look fine - no coarseness in the midtones as a result of leaving 
out the dark gray inks.  No swapping is necessary with the three K inks 
installed - all bases covered.  The warm PK is used with the warm UT7 
gray for the "carbon" and sepia profiles.  Yes, the neutral profile 
uses the UC_NEUTRALIZER to blend the LC and LM grays in equal 
proportions and if you define glop (LK) as the second gray ink for 
partitioning, but use the partition value for the LC or LM.  This will 
apply glop along the LC+LM curve only or you can edit the LK curve in 
the .quad file to change the glop distribution or use a glop toner 
curve.

Carl

On Feb 17, 2005, at 11:19 AM, Steve Kale wrote:

>
> Carl
>
> How are you finding things skipping the dark greys?  I have now 
> received
> another set of cartridges and am trying to decide what to do.
>
> My understanding is that UT2 M and LM are the same as UT7 C and LC and 
> that
> UT2 Sepia is the same as UT7 sepia, so I have them.  I just got UT7 M 
> and LM
> and PKN.  So I can either run a UT7 setup or follow your approach.  I 
> don't
> mind swapping MK and PK/PKN when switching to matt paper.  I wonder 
> how much
> gain you get from PK vs PKN (rather than just PKN)?  I assume you are 
> using
> the UC_Neutraliser to blend LC and LM (and sepia)?
>
> Steve
>
>
>> From: Carl Schofield <scho@...>
>> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
>> Date: Wed, 16 Feb 2005 13:36:01 -0500
>> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
>> Subject: Re: [Digital BW] My experiences with GLOP and UT7
>>
>>
>> Daniel,
>>
>> Here are the inks and positions I'm using in the 2200:
>>
>> K - MIS Eboni black
>> LK - MIS Glop
>> C - PKN
>> LC - MIS UT7 LM gray
>> M - MIS PK
>> LM - MIS UT7 LC gray
>> Y - MIS UT7 Y Sepia
>>
>> Warm profile is just MIS PK, MIS UT7 LC gray, and Glop.  Cool profile
>> is PKN, UT7 LM gray, and Glop.  Neutral profile is PKN, MIS UT7 LM, 
>> MIS
>> UT7 LC, and Glop.  Sepia profile is MIS PK, MIS UT7 LC, MIS UT7 Y
>> Sepia, and Glop.
>>
>> Carl

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.