Digital BW, The Print

Stephen,

I ran the cleanout program and installed 2.1.8. Same problem. I can 
only print if I rename the qtrguilog.txt to .bat and run that. In my 
case, it does not matter what drive the tif file is on.

Thanks for all your work in creating the GUI and for working to fix 
any problems that come up.

John L

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Stephen 
Billard" <stephen@s...> wrote:
> I have some (perhaps) good news. 
>  
> While testing the cleanup program I was able to experience the 
problems some
> of you have been having--Printing but nothing happens. If you have 
DEBUG
> set, the Command window flashes by.
>  
> I think that something must be wrong in the copy of QTRgui 2.1.7 
that is in
> the QuadToneRIP version 2.1c. I have created what should be the 
same thing,
> but called it version 2.1.8 and posted it on
> www.sbillard.org/Shareware/QTRgui.htm. So far I haven't seen the 
problem
> with this copy. The only concern I have is that the problem with 
the other
> 2.1.7 copy was not persistent and I can't figure out what was 
different when
> it worked from when it did not.
>  
> I still recommend you run the cleanout program and start with a 
fresh
> install of QuadToneRIP 2.1c. Then install QTRgui 2.1.8 over top of 
that
> install.
>  
> -Stephen
>  www.sbillard.org/Stephen
>  
> 
> 
> [Non-text portions of this message have been removed]