--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "byushooter" <jellerbe@j...> wrote: > Thanks Andre for the quick reply. Since the cartridges were > installed and the bottom seal pierced, can I reuse them? Can I just > tape over the bottom of them or something so that I can create a > vacuum with the syringe? > > Thanks, > > Jenny I'm afraid you may need a fresh set of cartridges because you need to put a vacuum in them so that they draw the ink from the bottles through the tubes lines. And when you draw air from those filled cartridges for said vacuum, you'll have ink overflowing into your siphon! Also, I dont know if the tape of the bottom would hold when you start that vacuum. I fail to see how it could be done otherwise, but you never know, maybe someone will explain how to do it. Read the pdf carefully and make sure you understand the entire procedure before you start and take your time. Cheers, Andre
Message
Re: CIS with 1160
2004-04-17 by Andre
Attachments
- No local attachments were found for this message.