Digital BW, The Print

Hi Steve,

For me, I just load 1 sheet in the normal feed slot.
Press the paper button once.
Gently hold the left and right side of the paper and help the printer 
grab the paper.
You will hear it push back at you and you can stop helping it through.
Open the lid and make sure about 1/4 to 1/2" of the paper is showing.

It may take a few times....and it is frustrating.....but it works.
If the red paper light comes on, hit the paper light again to eject and 
try again.

After a while you will know how much pressure to put on the paper to 
get it through.

Please post on how you like that paper.  I am looking for a smooth 
matte and have heard great things about HM.

Good luck,

Ashley




On Friday, April 9, 2004, at 06:12 PM, spersky123 wrote:

> Hello,
>
> I just my batch of quality paper from Hawk Mountain.  It is thick
> paper. Is there a problem with loading that paper through the
> automatic sheet feeder?  Epson says that the thick paper should be
> manually loaded, but that seems like a pain.
>
> Thanks
> Steve
>
>


[Non-text portions of this message have been removed]