Digital BW, The Print

Any problems in a system with a CFS requires you first substitue
original Epson carts to determine if you have a nozzle problem or cart
problem. Otherwise you'll be chasing a nozzle problem when you really
have a cart problem. Your's sounds like it could be a cart problem but
you can tell for sure if it prints fine with Epson carts. Call MIS and
you'll eventually ending up talking to Bob, the owner. He'll probably
tell you to disconnect the cart from the tube, suck out all the ink
from the bottom and bottom refill with exactly 9cc's of ink (for a
1280 cart), let sit for a few hours then try it. CFS carts need the
right amount of air in them. I love my MIS CFS but they can be a bit
quirky to set up. 
Bob Michaels

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Harry Saddler
<hsaddler@p...> wrote:
> I just switched my 1280 from MIS VM to MIS UT-2/Eboni, using a new, 
> prefilled set of MIS CFS carts & tubes. I cannot get clean nozzle 
> checks. I did windex-on-pad, windex-under-head, 
> windex-nozzle-injection, MIS's de-foaming procedure, several cycles of 
> 3 cleaning passes followed by three purge prints. For my labors, one 
> color is now not printing at all, and the black cart just squirts ink 
> on the edge of the page. I must be doing SOMETHING wrong!?
> 
> Harry