Digital BW, The Print

> Did you have any problems with foaming or bubbles when applying the  
> coating with the roller?

No. I use some force when applying the coat at first, then I gradually
lower the pressure of the roller until there is almost no pressure. This
seems to smooth out the coating at the end.

I remember I had to dilute the Golden coatings up to 50% with water to
get a smooth coat, but this one seems to work very well right out of the
can.

I've only done this a few times, so there might be better ways to do
this, but the results I'm getting are already very good.

--
Daniel Staver
http://daniel.staver.no