http://www.cyberhalides.com/piezography-printing/microbanding-and-gloss-printing-issues-with-qtr/
---In DigitalBlackandWhiteThePrint@yahoogroups.com, <roark.paul@...> wrote :
On Tue, Apr 4, 2017 at 12:05 PM, f.cozzi@... [DigitalBlackandWhiteThePrint] <DigitalBlackandWhiteThePrint@yahoogroups.com> wrote:Hi Paul,
I found a very simple trick to work around the microbanding in the top and bottom on my 1500W.I cut a spare sheet in two and I tape those pieces using a very delicate masking tape to the top and bottom of the sheet I want to print on.Basically from an A4 = 210 * 297 I get a "double A4" 210 * (297/2 + 297 + 297/2). I then set up a custom format in QTR and tell it to print in the middle. It works perfectly.I guess this custom format could be added to the list by editing the printer PPD file by I haven't tried yet.Regards,Federico