Digital BW, The Print

Hi,

Great thanks, unfortunately I don't use or own photoshop, I print on
surface papers with the  ICC's I got withthe UT-14 kit (those made by
Paul), and on Matte with the QTR and the description files also made by
Paul.

It'd be really great if it was possible to print out calibration patterns
and send to MIS and get proper custom ICC's generated as one can with
Piezography, that'd make life so much easier with the MIS ink...

:)



--
http://felinik.com
http://www.facebook.com/jf.felinik <https://www.facebook.com/jf.felinik>


2013/6/4 remononaz1 <homershannon@...>

> **
>
>
> I developed two color curves for use with UT-14 on glossy and satin
> papers. I've not used Museo Silver Rag, but the two curves work very well
> on Red River Arctic Polar Gloss, Ultrapro Satin and Polar Pearl Metallic. I
> think they will work on just about any glossy paper, though you may need to
> put a custom ICC with them. I've used them with custom ICCs and Gamma 2.2
> printer control setting successfully. You can get copies of the curve .acv
> files at:
>
> http://sdrv.ms/18L6GoZ (neutral) and http://sdrv.ms/11p4e5F (warm)
>
> These will at least give you a defect-free surface and probably good tone.
> Black density and shading may require further work with an ICC or levels
> adjustment.
>
> Homer Shannon
>
>
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "J.F. Felinik" <jf@...>
> wrote:
> >
> > Lately I've been trying out some new great papers, and wonder if anyone
> > happen to have a profile for UT-14 and Museo Silver Rag?
> >
> > I've used this paper with the Ilford Gold Fibre Silk ICC from you Paul,
> and
> > it's by far the best result I've ever achieved with this inkset! Is there
> > anyone who has a custom curve for this paper, or anyone else using the
> > UT-14 and this paper that also would love to get a curve for it?
> >
> > :)
> >
> >
> >
> >
> > --
> > http://felinik.com
> > http://www.facebook.com/jf.felinik <https://www.facebook.com/jf.felinik>
> >
> >
> > 2012/8/19 Paul <roark.paul@...>
> >
> > > **
>
> > >
> > >
> > > "jffelinik" <jf@> wrote:
> > > >
> > > > I use the MIS Ultratone set on my epson 1400 (MIS UT-14), ...
> > >
> > > > I assume there's something similar available for your 4880 from MIS.
> > > ...
> > >
> > > The problem I ran into with the blended carbon + color inksets like
> UT-14,
> > > where one channel is a blend, is that on wide format printers the print
> > > tones were not stable. See the graphs on page 4 of
> > > http://www.paulroark.com/BW-Info/4K+.pdf
> > >
> > > So, I switched to a format that used non-blended inks only. That is
> what
> > > the inkset approach described at
> > > http://www.paulroark.com/BW-Info/4000-6K-Plus.pdf does.
> > >
> > > Paul
> > > www.PaulRoark.com
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>  
>


[Non-text portions of this message have been removed]