Ok, I'll give it a shot. The 1st Head Cleaning reported the maint tank at 18%, now, 4 cycles later it's "nearly full." On Sun, Nov 11, 2012 at 7:03 PM, George Pappas <george@...>wrote: > Hello Lew, > > Power cleaning is the way to go�.3x will totally flush out your lines and > print heads. If you have the remote panel software, do it from your > computer. Make sure that you have enough ink and capacity in your > maintenance tank. > > Best Regards, > > George > > > On Nov 11, 2012, at 6:45 PM, Lew Schwartz <lew1716@...> wrote: > > > I've left my 4880 idle for too long and now I repeatedly have this > message. > > I've done Auto Nozzle Check and Head Cleaning 5x now. I ->GUESS<- a Power > > cleaning is the next step, but I've never done one and would appreciate > > some input from the list. > > Thanks! > > > > [Non-text portions of this message have been removed] > > > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Please visit the Group Homepage to check the Files, and other resources as > they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep > them short. > - Good manners are required at all time. No personal attacks or flames. > Hostile, aggressive or argumentative users may be removed from the > membership without notice. > - Keep your posts and threads related to the group topic of digital B&W > printing. Users who persistently make off-topic posts may be removed from > the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group Owner > and Moderators. See �Group Topic, Rules and Guidelines� in the Files > section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE �OWNER� AND > �MODERATORS� OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO > YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE > �OWNER� AND �MODERATORS� OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN > ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR > THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) > UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO > GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO > GROUP. > Yahoo! Groups Links > > > > -- -Lew Schwartz [Non-text portions of this message have been removed]
Message
Re: [Digital BW] Epson 4880 Nozzles Still CLogged
2012-11-12 by Lew Schwartz
Attachments
- No local attachments were found for this message.