Digital BW, The Print

It took awhile, but I was finally able to get my 7600 working with my
Windows 7-64 computer.  I've only installed the Eboni cartridge, as I'm
waiting for some replacement cartridges. (The other spots have cleaning
fluid in them.)

I printed out the QTR calibration page on Arches and HPR.  The prints
air-dried for an hour or so, and then I hit them with a hair dryer for
about 5 minutes.  I believe the dmax of the Arches should increase over
night.

I used a Spyder Print spectro to measure densities, using a piece of
natural white mat board under the print.

The Eboni + Arches yielded a max density of 1.57.
The Eboni + HPR yielded a max density of 1.62.


[Non-text portions of this message have been removed]