Digital BW, The Print

Thank you Clayton,

You're absolutely right. I must have not have been thinking, but the 48X0 class printer has LFP Remote Panel utility that gives the ink usage for each print job sent to the printer. And sure enough, both C and M inks have been used for some +10/+5 ABW setting prints I made recently.

Regards.

Shilesh

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "ClaytonJ" <cj@...> wrote:
>
> 
> 
> Hello Shilesh,
> 
> >Does anyone know the ink usage with ABW in a 4800 printer? Specifically, I would like to know if full strength C and M inks are used within +/- 20 points of the color wheel tint picker.
> 
> I think the answer is yes.  I have tracked my 2400's ink usage from day one (about 4.75 years now) and here's the results in order of % usage (based on number of carts used).  Most of the time I use a slightly warm of neutral tone with ABW settings such as (+2h,+8v).  This chart shows some C and M use.  I'm assuming that the 4800 usage will be similar to the 2400.
> 
> LLK...17.9%
> LM....16.6%
> LK....15.5%
> LC....14.1%
> MK....11.5%
> C..... 8.9%
> Y..... 8.9%
> M..... 6.4%
> 
> Sub groups look like this:
> 
> 3 K's = 44.9%
> LC/LM = 30.7%
> CMY = 24.2%
> 
> Regards,
> Clayton
> 
> 
> Info on black and white digital printing at    
> http://www.cjcom.net/digiprnarts.htm
> I-Trak 2.1   http://www.cjcom.net/itrak.htm
>