Yamaha DTXpress/DTXplorer/DTXtreme

I have tried the Pintech Dingbat. It is not as sensitive as the
stock Yamaha round pads and cymbal pads. It might work ok
if you switch things around and use them for inputs 1-6 with the
attenuation switches in the high sensitivity position.

One nice thing about the Dingbat ( and I assume the 6" Nimrod)--
They are the same diameter as the rack tubes. If you remove the end
cap from the Dingbat, it will fit into the 'T' fittings of the rack. Or,
they
can be clamped on to the hex rods that are used for the round pads.

-Colin
----- Original Message -----
From: "Danny Scott" <funkthat@...>
To: <DTXpress@egroups.com>
Sent: Monday, January 15, 2001 8:37 AM
Subject: [DTXpress] alternate pads


> Hi guys,
>
> Im looking to purchase a dual trigger pad to use in the 9/10 jack. I
> want to expand my cymbal possibilties. Are there only certain types
> of pads that are compatable with the dtxpress brain? I know obviously
> Yamaha will work, but what about other brands? Has anybody tried
> the "trigger bar"? Will this work with the dtxpress? Thanks for your
> help.            Danny Scott...Funky New York City....
>
>
> Community email addresses:
>   Post message: DTXpress@onelist.com
>   Subscribe:    DTXpress-subscribe@onelist.com
>   Unsubscribe:  DTXpress-unsubscribe@onelist.com
>   List owner:   DTXpress-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/DTXpress
>