Yamaha DTXpress/DTXplorer/DTXtreme

--- In DTXpress@yahoogroups.com, "sirius9x" <4dddd@w...> wrote:
> Is it possible to connect a simple tom pad and a simple cymbal pad 
to
> input 9/10 and control them separately (playing different sounds)?
> What do I need?
> 
> Thanks for all answers

Even another option:

Buy the splitter cable and move your Tom3 TP65 mono pad from zone 5 
to zone 9 and move your Ride1 PCY65 mono pad from zone 6 to zone 10. 

This will leave you with one stereo zone 5 and one Stereo (3-zone) 
Zone 6. 

Then the Zone 5 could be used with any stereo cymbal or pad. Just 
remember that on the base DtxpressII module it does not have choking 
capabilities on zone 5, if you choose to use it with a stereo cymbal 
pad like the PCY65S/PCY80S.

You could then use Zone 6, which has the ability to choke, with a 
PCY65S Cymbal pad. It could also be used with the soon to be release 
PCY150S three zone cymbal (bell/bow/edge) cymbal pad to add a three 
zone pad to your kit. 

Zone 6 could also be used with a TP65S, so that you could add three 
sounds (pad,rim1,rim2)

OGD