Yamaha DTXpress/DTXplorer/DTXtreme

Hi Ed , no i had just used the strero cable of my snare for my stereo 
cymbal pad until i buy another stereo cable ( the mono cable was on 
snare ) but forget about this cable mix cause to be sure that it's 
not a cable problem i go back to original cable , but problem still 
here , i have to wait 2 or 3 sec before i can play a second note on 
my snare pad :-((( 
what can do that thing ?
Stephane

--- In DTXpress@yahoogroups.com, "liberatusvirus 
<liberatusvirus@y...>" <liberatusvirus@y...> wrote:
> Hi Stephane,
> 
> I'm not sure that I understand your connection from the pad to the 
> module. Ordinarily, I'd recommend that you lower the cymbal's self-
> rejection number to see if that helps. But how can you be using the 
> same stereo cable for both the snare and the cymbal? Are you using 
a 
> splitter from the snare and cymbal into a single stereo cable that 
> attaches to input 2 so that you can use them at the same time? If 
> so, it simply won't work, whether your splitter is stereo, mono, or 
> some combination of the two. How can you even program input 2 to 
> receive independent snare and cymbal sounds--by rim and body or 
> voice 1 and voice 2? You should be getting a mix of snare and 
cymbal 
> sounds on each pad regardless. Get a new cable and plug the cymbal 
> into 9/10. Understand, however, that you will not get the rim sound 
> on it, because input 9/10 only picks up one mono pad, two mono 
pads, 
> or one dual-mono pad. I hope I haven't completely missed your point.
> 
> Ed
> 
> --- In DTXpress@yahoogroups.com, "dopmi <mapod@w...>" <mapod@w...> 
> wrote:
> > Hi , i have one of my cymbal pad ( Yamaha stereo ) it's a second 
> pad 
> > and on this one the ride surface is for a splash , the problem is 
> > that i have to wait 2 or 3 seconde before i can play a second 
note 
> on 
> > this surface , i first think it was because i use a long decay 
for 
> > this splash but even if i reduce decay and make it to 0 the 
> problem 
> > still here .... 
> > one thing i have to say is that for now as i don't yet have a 
> enough 
> > stereo cable for this new streo cymbal pad i use the stereo cable 
> of 
> > the snare pad and snare pad entry too for this cymbal pad 
> > anybody can help me ?
> > Thank's
> > Stephane