--- In DTXpress@yahoogroups.com, "Keith" <keith@k...> wrote: > There are four "zones" and the force sensitive resistor progressively > shorts them out. Three of the resistors are in series and > progressively shorted out with 1k always in series. The resistors are > 10k, 47k and 150k. This means you get 1k, 11k, 58k, and 208k > approximately. I am still puzzled by the tip of the plug. It has a > 150k resistor in series and seems to detect the bottom of the stroke, > but will give higher resitances at other points. There is also a > diode and resistor across the 1k in series with the ring. Keith, Could the tip be responsible for the foot splash at the bottom of the stroke? Ed
Message
Re: question about DTX hihat input
2005-01-05 by emf
Attachments
- No local attachments were found for this message.