Re: new evolver user
2003-07-30 by Riccardo Coen
... I have this feeling that my evolver was shipped with the Transpose parameter at 36 as well. Maybe Mr. Smith should be informed? Ciao, /R
Messages
Browse messages
Page 118 of 144 · 7159 messages matched
Re: [Evolver] Re: doepfer pocket control
2003-07-30 by blip
... they do... very very well. i d recommend getting the 1600X version though... it has more functionality and is more flexible. ... nice url... ;) bleep. out.
Re: [Evolver] Re: new evolver user
2003-07-30 by blip
... interesting solution! i haven t played with the external inputs much recently though... been concentrating on making a blank template patch and turning it
Re: [Evolver] Re: doepfer pocket control
2003-07-30 by M-.-n
Has anyone tried Novation s remote 25 with evolver ? It looks like a very nice controller. ... From: mr julian To:
Re: [Evolver] Re: doepfer pocket control
2003-07-30 by mr julian
From: adamburr1973 ... get a peavey PC1600. I admit that it s *awful* to setup a preset on this thing, but the good news is that
Re: doepfer pocket control
2003-07-29 by adamburr1973
after doing a little more research i think the answer to my question is no. the pocket control cannot send sysex messages and i guess that is what the evolver
Re: new evolver user
2003-07-29 by silverb0x
i don t even have an evolver yet, but you might try turning on the envelope follower, hitting env 3 negatively with it, and then hitting the VCA with that for
doepfer pocket control
2003-07-28 by adamburr1973
has anyone tried using the doepfer pocket control with the evolver? is it a good match? does the pocket control have a preset that works well with the evolver?
Re: new evolver user
2003-07-23 by thligrdd
Actually, I loaded a 4-bar loop of a 909 pattern being processed with the evolver onto this very group, it s in the files section, I think it s called
Re: [Evolver] Re: new evolver user
2003-07-23 by blip
... i know... the filter was wide open, res at zero... the problem is with the dynamics of the snare and hats vs. the dynamics of the kick. the evolver is just
Re: [Evolver] Re: new evolver user
2003-07-23 by peter sedin
so..what does ext.input goes trough?? the filters right? so if you want the snares etc to sound more you should have a higher value on filter cutoff. best
Re: [Evolver] Re: new evolver user
2003-07-23 by blip
... i don t use a mixer, but yeah, the drums sound pretty much the same coming out of the 909 as they do coming out of the 909 and going through the evolver
Re: new evolver user
2003-07-23 by thligrdd
This is odd. It doesn t sound like this when you just run the drums straight into your mixer? I often run gear through my evolver, with a patch I use so that
Re: [Evolver] Re: new evolver user
2003-07-23 by blip
... yeah, there s input gain and ext in volume. ... the problem is the dynamics... i seem to need to send the signal through a compressor (which i don t have)
Re: new evolver user
2003-07-23 by SoundEngine.com Sales
Yes, the input pad for the audio input is the right parameter to adjust. Press the [Main] Button twice and adjust knob three. You will see the parameter change
Re: new evolver user
2003-07-22 by pela_gius
... I m away from the Evolver right now so this may not be too helpful or correct. But I was having the opposite problem (input signal to low) and later while
new evolver user
2003-07-21 by blip
hey there... i just got my evolver a few days ago and found this list today, so i figured i d say hi. so hi. heh. i wish i would ve thought to look for this
Re: Just one question about Evolver...
2003-07-20 by thligrdd
No, I think it only accepts Roland style (DIN?) sync as an input.
Re: [Evolver] Re: Just one question about Evolver...
2003-07-19 by peter sedin
can cyclod be clocked by midi? peter __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com
[Evolver] Re: Just one question about Evolver...
2003-07-18 by thligrdd
Gah, you re right. I don t know where my head was at when I posted that. The worst part is that I *know* all of that stuff, I don t know why I was handing out
RE: [Evolver] Re: Just one question about Evolver...
2003-07-17 by David
Uh, no. It s not a sequencer, it s a synth. Your thinking of the cyclodon, which is a CV seq., not midi :) Both are made by Technosaurus... Both of those
Re: New file uploaded to DSI_Evolver
2003-07-15 by Riccardo Coen
Hello folks, I have just posted a preset file for Doepfer Drehbank that allows to program the evolver sequencer from it s knobs. I think it can be used with
New file uploaded to DSI_Evolver
2003-07-15 by DSI_Evolver@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the DSI_Evolver group. File : /EVOLSQ.DBP
Re: 2003 User Forum Soundset
2003-07-14 by ski_ex5tech
My sincere apologies to the entire group for the delay, and for my general quietness lately. My work schedule has been horrendous... many 60 to 80 hour plus
Re: 2003 patches
2003-07-14 by linuxmanvan
... did we? I am interested in hearing some of them....
Re: [Evolver] Highpass Question
2003-07-11 by Alex
I know, I know! Is the highpass set to at least 1? If not the mod sources will have no effect on it, until it s made active by setting the actual high-pass
Re: [Evolver] Re: y cable to use headphones... where?
2003-07-11 by Miles Bader
... Nah, it sounds fine, the E certainly has no problem driving phones from its line outs, even my hard to drive 240Ms; D.S. even recommends doing it (when
MIDI SEQUENCERS
2003-07-11 by fibodah
If you want a good hardware sequencer try the Doepfer MAQ 16/3 ... effects, ... sequencer ... this ... Evolver... ... one, ... to
Re: [Evolver] y cable to use headphones... where?
2003-07-11 by Richard Gough
I use a Hosa STP-202 Y-cable with a Hosa GPP-105 coupler. The Y- cable comes in various lengths. Both are sold by major online retailers such as 8thStreet.com
Re: [Evolver] y cable to use headphones... where?
2003-07-10 by Ravi Ivan Sharma
I was able to hook up what I needed for headphones at Radio Shack. A female stereo minijack split to left right rca jacks and a couple of rca to 1/4 inch
Re: [Evolver] y cable to use headphones... where?
2003-07-10 by Miles Bader
... The closest thing I ve been able to find has been the above Y-cable except with a 1/8 headphone jack instead of 1/4 . I use it with a 1/8- 1/4 adaptor
Re: y cable to use headphones... where?
2003-07-10 by Jukka
... Ummm ... the outputs from the Evolver are at line level. Don t think thats not a good match for headphones. That s probably why the other responder says
Re: [Evolver] y cable to use headphones... where?
2003-07-10 by mark dunn
Hi, well what a coincidence! I too am on holiday have my evolver with me. I have been using a stereo rca (fitted with rca= 1/4 bullet)= phones minijack socket
Re: [Evolver] y cable to use headphones... where?
2003-07-10 by M-.-n
When u buy that... make sure you try it before.. all the splitters I ve found where absolute shite ! M-.-n http://n0s.10pm.org/ ... From: r paul seymour
y cable to use headphones... where?
2003-07-10 by r paul seymour
hello! i m an evolver owner. however, i havn t had the time i want to use it. i m on an extended trip, and i brought it with me. however, i d like to use it
Highpass Question
2003-07-10 by peteranton2003
I have tried to program a drum loop on the Evolver (BD, SD, CYM). I set OSC3&4 fairly low to Sin, assigned ENV3 to OSC3&4, assigned SEQ1 to OSC3&4, assigned
Re: Just one question about Evolver...
2003-07-10 by Jukka
... Perhaps you mean the Technosaurus Cyclodon?
Re: Just one question about Evolver...
2003-07-09 by thligrdd
Unfortunately, the sequencer only controls internal parameters. The good news is that the evolver makes a great guitar processor in itself. It does distortion,
Just one question about Evolver...
2003-07-09 by m1kefxman
Hi everyone! My name is Mike, newbie on this list... I don´t own any Evolver... but I´m trying to figure some things before eventually buying one, so
random patch generation
2003-07-07 by Jeff Kissinger
Reagrding an OS update, I wish very much that he would add random patch generation like on the Waldorf synths and reaktor. Jeff ... ===== Jeff Kissinger
For anyone interest: SCD song using the Evolver
2003-07-06 by Boele Gerkes
Hi folks, Created this song this weekend: http://www.synthmusic.info/mp3s/dancebaby.mp3 Dark sound in the beginning: sample on the Emulator with Small Stone
Re: New OS?
2003-07-04 by thligrdd
... Well, a Mr. Robert Smith told me he was sure there was going to be an OS update, with a whole bank of Cure patches! But I don t know how qualified he is as
New OS?
2003-07-04 by linton_paul
Any word from Mr. Smith on an update? There was talk a while back, but I haven t read anything in a while...
Re: [Evolver] evolver midi?
2003-07-03 by Paul Nagle
On Thu, 03 Jul 2003 19:10:39 -0000, Matthew Davidson ... Nah, NRPNs are shite... Access have the best solution I ve seen - when CCs run out they use Poly
Re: [Evolver] evolver midi?
2003-07-03 by pela_gius
... parameters ... Why would you want to control all 250 parameters? For programming, yes of course you just use the evolver s great interface. But for
Re: [Evolver] evolver midi?
2003-07-03 by Matthew Davidson
... In the evolver s defense, there are more editable parameters than there are MIDI CCs available, and the parameter range is sometimes greater than 128
Re: [Evolver] evolver midi?
2003-07-03 by Paul Nagle
... Agree with all the points. I just happen to prefer synths that use more tweakable controls such as MIDI CC, Poly Aftertouch etc. Cos when you have such a
Re: [Evolver] evolver midi?
2003-07-03 by scd
on 03-07-2003 13:49, mr julian at jujulilianan@hotmail.com wrote: at least programming on the evolver, you have 1) writing on the panel to show which page is
Re: [Evolver] evolver midi?
2003-07-03 by mr julian
From: Ronald ... Actually.. this is maybe making it sound worse than it really is... MIDI is a serial interface, so only one MIDI *message*
Re: [Evolver] more midi
2003-07-03 by Ronald
... identical in ... manufacturer, and are ... Hmmm, the Peavy looks a bit nicer but that s about it. It s a very solid, high quality built device IMO.