Neil, it was a good idea to remind us to think about how the filters interact, but Miles is correct. The low pass filter takes out the high frequencies (it allows the lows to "pass"), while the high pass filter removes the low frequencies. If the low pass filter was using a very low cutoff frequency, applying the high pass filter (especially with a high cutoff frequency) would at best leave you with a VERY "thin" sound at low amplitude. Ski www.ex5tech.com EX5Tech Evolver forum: http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23 --- In DSI_Evolver@yahoogroups.com, Miles Bader <miles@g...> wrote: > "Neil Goldstein" <ngold@a...> writes: > > If the low pass filter is set to too low of a frequency, you won't hear > > any changes with the highpass filter, as there aren't enough highs to > > hear a difference.. > > I think in that case you won't hear any sound at all... :-) > > -Miles > -- > Come now, if we were really planning to harm you, would we be waiting here, > beside the path, in the very darkest part of the forest?
Message
Re: Mod destination highpass
2003-03-31 by ski_ex5tech