inputs and outputs (was Re: programming languages)
2006-03-10 by john mahoney
----- Original Message -----
From: "djbrow54" <davebr@...>
>
> Mine are not input attenuators. They are 0 - 10 volt controls sourced
> from a regulator and normalled to the inputs. With no input plug the
> controls provide 0 to 10 volts. With an input plug, the controls are
> disconnected and there is no attenuation
Sheesh... I knew that! Bad shorthand. [Slaps self on wrist.] I want what you
have. (Thou shall not covet thy neighbor's input controls? ;-)
--
john