ComputerVoltageSources

I secured the LEDs in place with a little epoxy...

I finished the board last night and now moving onto finishing the
remainder of the wiring. 

I have one question regarding the wiring of the switches, for the
Start / Stop / AUX - ON-OFF-(ON)Toggles the top and bottom tabs of the
switches and connected to together so we have a ON and mom ON for
those functions?

Thanks
Chris




--- In ComputerVoltageSources@yahoogroups.com, "djbrow54" <davebr@...>
wrote:
>
> You have LEDs in the panel.  How did you mount them? I used a small 
> breadboard and then silicon RTV to the panel.  Just curious.
> 
> The panel is public so no issue there. As to the LCD, I put a command 
> in there to change the power up message and store it in eeprom so you 
> can customize that as well. Once the system is all together and 
> programmed, the power up message is generally never seen since your 
> program more than likely displays something anyway.
> 
> Dave
> 
> 
> --- In ComputerVoltageSources@yahoogroups.com, 
> "thealisonproject" <alison@> wrote:
> >
> > Hi Everyone
> > 
> > All my parts arrived so I decided to throw a few pics as the 
> building
> > goes forward.
> > 
> > Note: this was my first FPE panel so I had to put a color in there. 
> I
> > didn't think about it until afterwords but no disrespect to Dave 
> Brown
> > for removing ModularSynthesis from the panel which he designed, he
> > will be represented on the LCD.
> > 
> > http://thealisonproject.com/cvs.html
> > 
> > Chris
> >
>