ComputerVoltageSources

I just put 4 fpd designs in the front panel folder.  I am undecided on 
the number of calibrated inputs so I tried different layouts with 
none, 4, or 8.  I also changed the design to use Piher PC controls 
since there are so many.  The only change is the mounting hole is 
smaller.

Comments and suggestions welcomed.

Dave


--- In ComputerVoltageSources@yahoogroups.com, "djbrow54" <davebr@...> 
wrote:
>
> I got it all to fit in a 5U x 5U panel.  I uploaded a photo to my 
> photo folder.  The display PCB is much larger than the display area 
so 
> I had to move some items around.
> 
> Some details ...
> 
> The MIDI connectors are Mouser 16HR655.  Very nice.
> 
> The LEDs are 3 mm
> 
> The switches are the NKK 1/4" flat handle toggles.  I generally use 
> momentary but this time I think I'll use (ON)-OFF-ON so I can use 
them 
> as mode switches.
> 
> The jack spacing side-to-side is narrower than MOTM for everything 
to 
> fit.  It is close, though.
> 
> The knobs are the 0.75" diameter.  Same as on my PSIM and the Encore 
> UEG.
> 
> The LCD is centered vertically the same as the MOTM-650.
> 
> Other thoughts ...
> 
> I hope the start / stop are general purpose inputs AND OUTPUTS.  
There 
> is no reason to limit these to inputs.  I think start, stop, and aux 
> should all be general digital I/O.  I added switches to each.
> 
> Dave
>