ComputerVoltageSources

Based on all the 'back and forth' the following seem to be missing:

9 pin RS-232
5 pin MIDI in
5 pin MIDI out

The following seem to belong on another panel (connected behind the
primary panel):

AUX I/O jack??????
LCD display??????
Cursor/Enter buttons for LCD display?????

I would think that the AUX I/O, I2C, SPI, and other(?) signals would
be on the PCB for connection behind the panel to optional add-on
panels.  Usinf .1" connectors?  DIP headers?

Anyone up to a 2u MOTM or (preferred) 2u Synthesizers.com panel design?

Larry T.

--- In ComputerVoltageSources@yahoogroups.com, "Grant Richter"
<grichter@...> wrote:
>
> Reset Pushbutton
> 
> Run Pushbutton, Run LED, Run input jack
> Stop Pushbutton, Stop LED, Stop input jack
> 
> 8 general purpose uncalibrated CV input jacks
> 1 to 8 1 volt per octave calibrated input jacks (probably only need
1 for most purposes)
> 8 offset pots
> 8 attenuator pots (dual function I hope)
> 8 output jacks
> 8 Output LEDs
> 
> AUX I/O jack??????
> LCD display??????
> Cursor/Enter buttons for LCD display?????
>