ComputerVoltageSources

OK, I plan on laying it out as follows:

8 g.p. uncalibrated input jacks
8 1v/oct calibrated input jacks
8 offset pots
8 attenuator pots

in horizontal rows on the LH side.

LED, cursor/enter buttons -  top centre

run button/led/jack & stop button/led/jack - bottom centre

8 output jacks & 8 output LEDs in 2 vertical columns down the RH side.

Dunno about the aux i/o

I figure that if I add all this, and anything gets deleted, it's easy
to remove it using the .fpd editor.

IN MY DREAMS I imagined this as fitting into a panel 2 x the width of,
say, a frac noise ring or binary zone, ha ha, peals of derisive
laughter - I'll see how it all fits into 4/5 of a complete fracrack,
IE twice that.  Maybe it can be shrunk into 3/5 or 7/10 and still be
comfortable to use, but I doubt it.



On 3/23/06, Grant Richter <grichter@...> wrote:
> Reset Pushbutton
>
> Run Pushbutton, Run LED, Run input jack
> Stop Pushbutton, Stop LED, Stop input jack
>
> 8 general purpose uncalibrated CV input jacks
> 1 to 8 1 volt per octave calibrated input jacks (probably only need 1 for most purposes)
> 8 offset pots
> 8 attenuator pots (dual function I hope)
> 8 output jacks
> 8 Output LEDs
>
> AUX I/O jack??????
> LCD display??????
> Cursor/Enter buttons for LCD display?????
>
>
>
> --- In ComputerVoltageSources@yahoogroups.com, "Norman Fay" <vietgrove@...> wrote:
> >
> > Having designed a few frac format schaeffer panels for Oakley PCBs
> > that I'm pleased w/,  I fancy having a try at this in frac format?
> > (unless Mr Firman is already on it, of course)  Can someone summarise
> > what items will be on the front panel?    8 outputs, 8 or 16
> > knobs...what else?
> >
> > On 3/23/06, djbrow54 <davebr@...> wrote:
> > > Anyone started to design / conceptualize what a front panel for this
> > > might be with all the controls, jacks, & LCD?  I'm starting to wonder
> > > how large it will be.  Size is important to me.  I'm thinking of the
> > > smaller knobs ala a UEG to minimize the width.  Seems like a good
> > > project for a new Stooge panel.
> > >
> > > Dave
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>