ComputerVoltageSources

On Mar 11, 2006, at 10:28 AM, Grant Richter wrote:

> I think we just plan to rotate the board.
>
> For Frac-Rac, the 4 inch is the vertcal dimension, for MOTM, the
> six inch is the vertical
> dimension. This why no board mounted pots or jacks.
>

Sounds good.

> Could you explain the different mounting brackets you mentioned or
> give a link to
> mechanical drawings?

Here are some pictures of the MOTM Stooge Brackets:

Modular Brackets:
http://www.wiseguysynth.com/larry/brackets/modular_brackets.htm
Perhaps Stooge Moe could give us mechanical drawings for these, as I
don't have any.

The Regular Stooge Brackets (short and long, 3 and four pot):
http://www.wiseguysynth.com/larry/brackets/4brackets.jpg (picture)
http://www.wiseguysynth.com/larry/brackets/bracket-draw2.jpg (mech.
drawing)

(both of these brackets are now sold through http://
www.stoogeindustries.com, above link just for reference)

So as you can see, using the modular brackets, you can put the
mounting hole anywhere you please on the main plate, or on the jack/
pot bracket. I think the plate is about 4 x 6" from the looks of,
but I haven't purchased any yet, so maybe someone who has one can
verify this? Moe?

-Henry