Casio CZ/ VZ/ FZ - Pro Series

Ok Steve, I think this was the problem:
vslight6.ocx is a control that  isnt used by the program but was somehow linked to my vb projekt. Only the english version I added yesterday had these problems, I should have been more carefully. However, I created a new installer that contains only two of the basic files: the program itself and the midiio.ocx. Try this, it should work. www.synthomania.de/czcontroleng.exe
If you need any further advice, just ask me.
Daniel
















  ----- Original Message ----- 
  From: steve_the_composer 
  To: CZsynth@yahoogroups.com 
  Sent: Saturday, June 28, 2003 2:12 AM
  Subject: [CZsynth] Re: cz101 sysex dump? must backup patches! help!


  --- In CZsynth@yahoogroups.com, Daniel Krüger <
  daniel.b.krueger@w...> 
  wrote:
  > I tested the software on several systems and had no such problems.
  > But I take your note serious and will remove the software from the 
  net!!
  > I think the main problem are the different language versions of 
  some systemfiles. Please install an english version and your system 
  should work again ! I'm really sorry for all that trouble.
  > Daniel 

  Thanks.

  My OS is Windows 98 SE [English langauge].

  The files that VBRUN60 replaced which were older than the ones I 
  previously had on the computer were:

  ASYCFILT.DLL      2.40.4275.1
  COMCAT.DLL        5.00.1601.1
  OLEAUT32.DLL      2.40.4277.1
  OLEPRO32.DLL      5.00.4275.1
  STDOLE2.TLB       2.40.4275.1

  Your program produces the following error message:

  CZControl 1.0

  Component 'vslight6.OCX' or one of its dependencies not correctly 
  registered: a file is missing or invalid

  I have never seen an error message with this wording before.  Is 
  vslight6.OCX one of your components or part of VBRUN60? Is it called 
  by your porgram?  vslight6.OCX is not on my computer.

  Norton WinDoctor reports no problems.

  I am trying to locate VBRUN60.EXE  MS has several updated versions.  
  I will try the latest one I can find.

  I hope this helps figure out the problem.  

  Steve


        Yahoo! Groups Sponsor 
       
       

  To unsubscribe from this group, send an email to:
  CZsynth-unsubscribe@yahoogroups.com



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


[Non-text portions of this message have been removed]