Casio CZ/ VZ/ FZ - Pro Series

am 31.10.2002 17:23 Uhr schrieb Lin Sprague unter lsprague@...:

> Do you think the procedure for changing the light for a CZ-1000 would be
> similar to this? Mine is burnt out, so it's next to impossible to
> program. If I could see what I was doing, I'd get a lot more use out of
> the machine.
> 
> I really dont know exactly...
> I know there some dealers in the Net selling the backlite-foil for
> AKAIs and FZs/VZs.
> Czs must use the same backlites;
> the procedure should be the same: the ³EL flat Luminous Plate² get only 5
> Volts from the Board via an inverter (needed to make the  the phosphor light)
> and is activated by an alterning electric field.
> No difference.
> 
> As you can see on the pix the Display in the FZ is really easy accessible -
> some screws around but nothing special ­ so why not in the CZs?
> I will unscrew my CZ-1 next weekend and add a new (green) plate too; so I¹ll
> make some nix Pix again.
> 
> the foil comes in 2 standard sizes (in Germany):
> 5.5 x 1.5 inch (138 mm x 87 mm) and
> 4.5 inch x 3.5 inch (112 mm x 87 mm)
> 
> just trim them to your size and voila!
> 
> 
Monster
++++++++++++++++++++++++++++++++++
http://www.cosmosynths.userpage.de
++++++++++++++++++++++++++++++++++




[Non-text portions of this message have been removed]