Alesis Andromeda A6 group photo

Yahoo Groups archive

Alesis Andromeda A6

Index last updated: 2026-04-28 22:41 UTC

Thread

Filter Sweep Range

Filter Sweep Range

2003-02-03 by Larry Pham

Hello. I'm a bit confused with the filter sweep range and need some assisstance. Turning the filter knob from 0-10% I can see ;on the display that it starts it's sweep but once it reaches about 70% it's finished. I am trying to get it so that the full sweep from start to end goes from all the way from the left to the ;right turn of the knob. I have tried adjusting both offsets but it doesn't seem to do any thing. Is there a specific setting? Any help is appreciated!
larry

Re: [Andromeda_A6-ION] Filter Sweep Range

2003-02-03 by Colin Chung

You must be doing something wrong, the offset for each filter should work :)
Show quoted textHide quoted text
----- Original Message -----
From: Larry Pham
To: Andromeda_A6-ION@yahoogroups.com
Sent: Monday, February 03, 2003 2:04 PM
Subject: [Andromeda_A6-ION] Filter Sweep Range


Hello. I'm a bit confused with the filter sweep range and need some
assisstance. Turning the filter knob from 0-10% I can see on the display
that it starts it's sweep but once it reaches about 70% it's finished. I am
trying to get it so that the full sweep from start to end goes from all the
way from the left to the right turn of the knob. I have tried adjusting both
offsets but it doesn't seem to do any thing. Is there a specific setting?
Any help is appreciated!

larry

To unsubscribe from this group, send an email to:
Andromeda_A6-ION-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: [Andromeda_A6-ION] Filter Sweep Range

2003-02-03 by Larry Pham

When I hold a note to trigger a sound and change the offset values, I can hear the changes but the display does not change from 22.3482 (flter 1) and my knob position is still only in between 2 & 3 o'clock. (full being around 5 o'clock) There seems to be a good 25% or so of space at the end of the knob rotation which does not do any thing. Is there no way to have the display match up with what I am hearing? I would like to have the initial postion of the knob ( about 7 o'clock) which is 0.0218 to sweep all the way to the end (about 5 o'clock) to show 22.3482. Like I said above it reaches 22.3482 at around 2:30 not 5 o'clock. What am I overlooking?
----- Original Message -----
Show quoted textHide quoted text
Sent: Sunday, February 02, 2003 11:13 PM
Subject: Re: [Andromeda_A6-ION] Filter Sweep Range

You must be doing something wrong, the offset for each filter should work :)


----- Original Message -----
From: Larry Pham
To: Andromeda_A6-ION@yahoogroups.com
Sent: Monday, February 03, 2003 2:04 PM
Subject: [Andromeda_A6-ION] Filter Sweep Range


Hello. I'm a bit confused with the filter sweep range and need some
assisstance. Turning the filter knob from 0-10% I can see on the display
that it starts it's sweep but once it reaches about 70% it's finished. I am
trying to get it so that the full sweep from start to end goes from all the
way from the left to the right turn of the knob. I have tried adjusting both
offsets but it doesn't seem to do any thing. Is there a specific setting?
Any help is appreciated!

larry

To unsubscribe from this group, send an email to:
Andromeda_A6-ION-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


To unsubscribe from this group, send an email to:
Andromeda_A6-ION-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: [Andromeda_A6-ION] Filter Sweep Range

2003-02-03 by Colin Chung

I think that's normal, from memory on the code404 mailing list, the last 25%
of knob movement isn't used.

anyway if you set the filter to the top position
and set the offset for say filter 2 to -50, the cutoff will off set to lower
freq, even though the display
keeps the actual cut-off freq to where it was originally. There are 2
off-sets
one for the env modulation amount and one for the keyboard track amount I
think
Show quoted textHide quoted text
----- Original Message -----
From: Larry Pham
To: Andromeda_A6-ION@yahoogroups.com
Sent: Monday, February 03, 2003 5:06 PM
Subject: Re: [Andromeda_A6-ION] Filter Sweep Range


When I hold a note to trigger a sound and change the offset values, I can
hear the changes but the display does not change from 22.3482 (flter 1) and
my knob position is still only in between 2 & 3 o'clock. (full being around
5 o'clock)  There seems to be a good 25% or so of space at the end of the
knob rotation which does not do any thing. Is there no way to have the
display match up with what I am hearing? I would like to have the initial
postion of the knob ( about 7 o'clock) which is 0.0218 to sweep all the way
to the end (about 5 o'clock) to show 22.3482. Like I said above it reaches
22.3482 at around 2:30 not 5 o'clock. What am I overlooking?

Re: [Andromeda_A6-ION] Filter Sweep Range

2003-02-03 by Colin Chung

The otehr way to offset is to use one of the mod buttons.
Show quoted textHide quoted text
----- Original Message -----
From: Colin Chung <coolcolj@...>
To: <Andromeda_A6-ION@yahoogroups.com>
Sent: Monday, February 03, 2003 5:48 PM
Subject: Re: [Andromeda_A6-ION] Filter Sweep Range


> I think that's normal, from memory on the code404 mailing list, the last
25%
> of knob movement isn't used.
>
> anyway if you set the filter to the top position
> and set the offset for say filter 2 to -50, the cutoff will off set to
lower
> freq, even though the display
> keeps the actual cut-off freq to where it was originally. There are 2
> off-sets
> one for the env modulation amount and one for the keyboard track amount I
> think
>
> ----- Original Message -----
> From: Larry Pham
> To: Andromeda_A6-ION@yahoogroups.com
> Sent: Monday, February 03, 2003 5:06 PM
> Subject: Re: [Andromeda_A6-ION] Filter Sweep Range
>
>
> When I hold a note to trigger a sound and change the offset values, I can
> hear the changes but the display does not change from 22.3482 (flter 1)
and
> my knob position is still only in between 2 & 3 o'clock. (full being
around
> 5 o'clock)  There seems to be a good 25% or so of space at the end of the
> knob rotation which does not do any thing. Is there no way to have the
> display match up with what I am hearing? I would like to have the initial
> postion of the knob ( about 7 o'clock) which is 0.0218 to sweep all the
way
> to the end (about 5 o'clock) to show 22.3482. Like I said above it reaches
> 22.3482 at around 2:30 not 5 o'clock. What am I overlooking?

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.