Alesis Andromeda A6

I think that's normal, from memory on the code404 mailing list, the last 25%
of knob movement isn't used.

anyway if you set the filter to the top position
and set the offset for say filter 2 to -50, the cutoff will off set to lower
freq, even though the display
keeps the actual cut-off freq to where it was originally. There are 2
off-sets
one for the env modulation amount and one for the keyboard track amount I
think

----- Original Message -----
From: Larry Pham
To: Andromeda_A6-ION@yahoogroups.com
Sent: Monday, February 03, 2003 5:06 PM
Subject: Re: [Andromeda_A6-ION] Filter Sweep Range


When I hold a note to trigger a sound and change the offset values, I can
hear the changes but the display does not change from 22.3482 (flter 1) and
my knob position is still only in between 2 & 3 o'clock. (full being around
5 o'clock)  There seems to be a good 25% or so of space at the end of the
knob rotation which does not do any thing. Is there no way to have the
display match up with what I am hearing? I would like to have the initial
postion of the knob ( about 7 o'clock) which is 0.0218 to sweep all the way
to the end (about 5 o'clock) to show 22.3482. Like I said above it reaches
22.3482 at around 2:30 not 5 o'clock. What am I overlooking?