AVR-Chat

At 01:30 AM 21/03/2005, you wrote:
>I know a guy that tried that with a mega16 but avr studio wouldn't
>see it as a jtag ice. The jtag ice mk-I has a mega163 in it. So you're
>saying the firmware from avr studio works unmodified in a mega16? If so,
>i'll have another look at his pcb.

You need a proper bootloader in the M16 before studio sees it as a
jtagice, you can then manually upgrade it with AVRprog. The M163
is no longer made but there would be some floating around. The M16
works. There is lots of info on how to get the bootloader set up and
manually upgrade the jtag (DN11 from avrfreaks) and at least one
bootloader...'Out There'..on the net.

Regards

John Samperi

******************************************************
                         Ampertronics Pty. Ltd.
   11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
          Tel. (02) 9674-6495       Fax (02) 9674-8745
                Email: samperi@ampertronics.com.au
                  Website  http://www.ampertronics.com.au
* Electronic Design   * Custom Products   * Contract Assembly
******************************************************