AVR-Chat

> Have a look at the Mega16 datasheet on page 145 and you'll see that
> nowhere does it say to use 24 as a UBRR divisor, it's always 16 (or 
8
> for double speed mode). If you're having to use 24 then either your
> clock speed is wrong or you ar esetting the wrong divisor. You 
stated
> that '0x51' is the correct divisor, however it should be a 
decimal '51'
> not hex '51' which is what you are setting.
> 
> Brian (another one)

I have read the datasheet. I'm not sure why it worked but it does and 
yes I would like to figure it out.

I have uploaded photos for my clock signal for a 2.4576 xtl
http://tech.ph.groups.yahoo.com/group/AVR-Chat/photos/view/ba64?b=1

and the data stream set at 9600 baud.
http://tech.ph.groups.yahoo.com/group/AVR-Chat/photos/view/ba64?b=2

Is there a prescaler for the system clock? Not sure what to look at 
next to figure it out.

Brian