AN1X as a master controller
2005-01-16 by spaceanimals
Finally managed to get the AN1X to sound only on channel 2, the Vintage Keys to sound on channel 1, thereby letting me switch from either source simply by changing the MIDI transmission channel. This is probably old hat to folks that are familiar with MIDI. Per Bruce Wahler,I hooked MIDI out from the AN1X to the Vintage Keys, then hooked the MIDI out from the Vintage Keys to the AN1X. Then I spent two hours looking at both manuals trying to figure out what was going on. I have no idea what combination finally worked. Hit it by luck more than anything else. I do remember I had to assign each AN1X scene to channel 2. How come they don't have nice clear instructions on how to do basic stuff in the manual? They always have cool little diagrams of various MIDI setups, but never tell you how to do it. Rainbow Jimmy http://www.spaceanimals.com http://www.soundclick.com/theelectricstarlightspaceanimals.htm