The Yamaha AN1x Synthesizer mailing list group photo

Yahoo Groups archive

The Yamaha AN1x Synthesizer mailing list

Index last updated: 2026-03-31 23:06 UTC

Thread

After Touch

After Touch

2003-08-10 by janhenkspeelmans

Hello all, am I wrong in this? You can set AT in the Control Matrix
to parameters Off.
Greetings, Jan Henk.

RE: [AN1x] After Touch

2003-08-10 by ddunn

Hi Jan Henk
I have only had AN1X a few days......so bear with me! What you say is
right
"Control Matrix parameters apply to the internal tone generator only"
However.
If you look at the utility/setup and play with the device and ctrl no,
theres an aftertouch (can change limit from 0 to 127).
If I set this to zero...does it switch it off?
I would like to switch off Aftertouch because I am using AN1X as master
keyboard.....
Thanks again
David






-----Original Message-----
From: janhenkspeelmans [mailto:jhspeelmans@...]
Sent: 10 August 2003 13:19
To: AN1x-list@yahoogroups.com
Subject: [AN1x] After Touch

Hello all, am I wrong in this? You can set AT in the Control Matrix
to parameters Off.
Greetings, Jan Henk.



Community email addresses:
Post message: AN1x-list@yahoogroups.com
Subscribe: AN1x-list-subscribe@yahoogroups.com
Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
List owner: AN1x-list-owner@yahoogroups.com

Shortcut URL to this page:
http://groups.yahoo.com/group/AN1x-list


Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

RE: [AN1x] After Touch

2003-08-10 by ddunn

Hi
On page 96 of the manual it has the statement:
Settings: 0 (off), CC 1 ~ 95, After Touch
What does this mean?
Thanks David

-----Original Message-----
From: janhenkspeelmans [mailto:jhspeelmans@...]
Sent: 10 August 2003 13:19
To: AN1x-list@yahoogroups.com
Subject: [AN1x] After Touch

Hello all, am I wrong in this? You can set AT in the Control Matrix
to parameters Off.
Greetings, Jan Henk.



Community email addresses:
Post message: AN1x-list@yahoogroups.com
Subscribe: AN1x-list-subscribe@yahoogroups.com
Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
List owner: AN1x-list-owner@yahoogroups.com

Shortcut URL to this page:
http://groups.yahoo.com/group/AN1x-list


Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Re: [AN1x] After Touch

2003-08-10 by Bruce Wahler

Hi Jan and David,

>Hello all, am I wrong in this? You can set AT in the Control Matrix
>to parameters Off.

This works for the internal sounds, but it does NOT prevent the AT messages from being sent via MIDI. In other words, the Control Matrix only decides how much the modulated settings will respond to MIDI AT (or the internal equivalent); it doesn't change how strong the level of MIDI AT data is at the MIDI Out jack.

I actually have only owned one keyboard that allowed the AT level to be changed: my old Roland D-50, which had a slider for AT level. I'm sure there are other examples, but on the whole, this kind of function is pretty rare. Most keyboards just send the raw AT data, and let the other end decide whether or not to use the information.

Regards,

-BW
--
Bruce Wahler
Ashby Solutions™ http://music.ashbysolutions.com
978.386.7389 voice/fax
bruce@...

Re: [AN1x] After Touch

2003-08-10 by Patrik "Rydan" Rydberg

Haven´t used the function myself, but a f a i k, Cubase SX should be able to
filter Aftertouch on a per channel basis using the input transformer.

Regards

Patrik

----- Original Message -----
Show quoted textHide quoted text
From: "ddunn" <david@...>
To: <AN1x-list@yahoogroups.com>
Sent: Sunday, August 10, 2003 7:25 PM
Subject: RE: [AN1x] After Touch


> Hi
> On page 96 of the manual it has the statement:
> Settings: 0 (off), CC 1 ~ 95, After Touch
> What does this mean?
> Thanks David
>
> -----Original Message-----
> From: janhenkspeelmans [mailto:jhspeelmans@...]
> Sent: 10 August 2003 13:19
> To: AN1x-list@yahoogroups.com
> Subject: [AN1x] After Touch
>
> Hello all, am I wrong in this? You can set AT in the Control Matrix
> to parameters Off.
> Greetings, Jan Henk.
>
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

>
>