The Yamaha AN1x Synthesizer mailing list

yes, i got it working :))) great thing. and thanks to you all.
now i have to figure out how to use multi instruments.. i can use
different channels
but the instrument is always the same. i hope i ll figure that out :)

René


PinheadX wrote:

> > hi there all.
>
> Hi!
>
> > i got myself a used Yamaha an 1x. Now i wanted to connect to my pc
> and
> > got problems with it.
> > I pluged in the midi cable (in and out and into the pc) but the PC
> > doesnt seem to be connected
> > with the Yamaha. I am using Cakewalk and tried Logic Audio.
> > Maybe the Midi Connection is broken, and thats why I got it at a
> fair
> > price.
>
> I had the same problem w/ my CS2x (but it was the cable...).
>
> > It would be great if some of you could me some infos about the
> setting
> > which i have to do at the Yamaha (channels, etc.) and the setting
> for
> > cakewalk.
>
> As far as I know the default AN1x's setting gives you the channels 1 &
> 2 to
> send and receive. First off all you should select the "Midi Ports"
> you'll
> use (be shure that it's properly instaled):
>
> ***Tools>Midi Devices>(select the one you want to use for In & Out)Ok.
>
> Then "import" the AN1x instrument definition to your cakewalk (if you
> don't
> have it I may send by e-mail or you may get it at the list's e-group's
>
> page):
>
> ***Tools>instruments>define>import>(select Yamaha)open>(select Yamaha
> AN1x)Ok.
>
> If you still having problems take a deep look at you cable. BTW, to
> sync the
> Cakewalk clock to control the arpeggiator (for example) set the arp.
> tempo
> to "Midi" (on my CS2x it's below 40bpm I assume that on th AN1x is the
> same)
> then set Cakewalk to send its clock:
>
> ***Tools>Project Options>Midi Out>transmit Midi
> Start/Continue/Stop/Clock>Ok.
>
> > Oh, i only have the PC and my Yamaha an 1x connected with midi.
> > just to let you know..
>
> In fact it doesn't matter at all, if there's two devices on the same
> channel
> they just shall respond to the same "info" at the same time, but you
> shall
> experience som trouble when sending SysEx.
>
> > thanks in advance
>
> You're welcome..:-)
>
> I hope it helps,
> PinheadX.
>
> -----------------------------------------------------------------------
> [where you set the price]
> -----------------------------------------------------------------------
> Community email addresses:
> Post message: AN1x-list@onelist.com
> Subscribe: AN1x-list-subscribe@onelist.com
> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> List owner: AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/AN1x-list

--
.oOo. http://shiva.mystical-paradise.de .oOo.

well, thanks alot for that info. but you are one step ahead :)
i meant, like :
channel 1 : instrument (patch) #1
channel 2 : instrument (patch) #2
etc.
right now i can only have all 16 channels with 1 instrument. or switch
my Yamaha to another channel but then i hear only one instrument.. well,
i am a midi rookie. so :)

René


PinheadX wrote:

>
> I was right....select the "Dual" mode and you'll get the 2 scenes
> working on
> different channels.:-)
>
> PinheadX.
>
>
> > yes, i got it working :))) great thing. and thanks to you all.
> > now i have to figure out how to use multi instruments.. i can use
> > different channels
> > but the instrument is always the same. i hope i ll figure that out
> :)
> >
> > René
> >
> >
> > PinheadX wrote:
> >
> > > > hi there all.
> > >
> > > Hi!
> > >
> > > > i got myself a used Yamaha an 1x. Now i wanted to connect to my
> pc
> > > and
> > > > got problems with it.
> > > > I pluged in the midi cable (in and out and into the pc) but the
> PC
> > > > doesnt seem to be connected
> > > > with the Yamaha. I am using Cakewalk and tried Logic Audio.
> > > > Maybe the Midi Connection is broken, and thats why I got it at a
>
> > > fair
> > > > price.
> > >
> > > I had the same problem w/ my CS2x (but it was the cable...).
> > >
> > > > It would be great if some of you could me some infos about the
> > > setting
> > > > which i have to do at the Yamaha (channels, etc.) and the
> setting
> > > for
> > > > cakewalk.
> > >
> > > As far as I know the default AN1x's setting gives you the channels
> 1 &
> > > 2 to
> > > send and receive. First off all you should select the "Midi Ports"
>
> > > you'll
> > > use (be shure that it's properly instaled):
> > >
> > > ***Tools>Midi Devices>(select the one you want to use for In &
> Out)Ok.
> > >
> > > Then "import" the AN1x instrument definition to your cakewalk (if
> you
> > > don't
> > > have it I may send by e-mail or you may get it at the list's
> e-group's
> > >
> > > page):
> > >
> > > ***Tools>instruments>define>import>(select Yamaha)open>(select
> Yamaha
> > > AN1x)Ok.
> > >
> > > If you still having problems take a deep look at you cable. BTW,
> to
> > > sync the
> > > Cakewalk clock to control the arpeggiator (for example) set the
> arp.
> > > tempo
> > > to "Midi" (on my CS2x it's below 40bpm I assume that on th AN1x is
> the
> > > same)
> > > then set Cakewalk to send its clock:
> > >
> > > ***Tools>Project Options>Midi Out>transmit Midi
> > > Start/Continue/Stop/Clock>Ok.
> > >
> > > > Oh, i only have the PC and my Yamaha an 1x connected with midi.
> > > > just to let you know..
> > >
> > > In fact it doesn't matter at all, if there's two devices on the
> same
> > > channel
> > > they just shall respond to the same "info" at the same time, but
> you
> > > shall
> > > experience som trouble when sending SysEx.
> > >
> > > > thanks in advance
> > >
> > > You're welcome..:-)
> > >
> > > I hope it helps,
> > > PinheadX.
> > >
> > >
> -----------------------------------------------------------------------
>
> > > [where you set the price]
> > >
> -----------------------------------------------------------------------
>
> > > Community email addresses:
> > > Post message: AN1x-list@onelist.com
> > > Subscribe: AN1x-list-subscribe@onelist.com
> > > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > > List owner: AN1x-list-owner@onelist.com
> > >
> > > Shortcut URL to this page:
> > > http://www.onelist.com/community/AN1x-list
> >
> > --
> > .oOo. http://shiva.mystical-paradise.de .oOo.
> >
> >
> >
> >
> >
> > Community email addresses:
> > Post message: AN1x-list@onelist.com
> > Subscribe: AN1x-list-subscribe@onelist.com
> > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > List owner: AN1x-list-owner@onelist.com
> >
> > Shortcut URL to this page:
> > http://www.onelist.com/community/AN1x-list
> >
>
> -----------------------------------------------------------------------
>
> -----------------------------------------------------------------------
> Community email addresses:
> Post message: AN1x-list@onelist.com
> Subscribe: AN1x-list-subscribe@onelist.com
> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> List owner: AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/AN1x-list

--
.oOo. http://shiva.mystical-paradise.de .oOo.

> hi there all.

Hi!

> i got myself a used Yamaha an 1x. Now i wanted to connect to my pc and
> got problems with it.
> I pluged in the midi cable (in and out and into the pc) but the PC
> doesnt seem to be connected
> with the Yamaha. I am using Cakewalk and tried Logic Audio.
> Maybe the Midi Connection is broken, and thats why I got it at a fair
> price.

I had the same problem w/ my CS2x (but it was the cable...).

> It would be great if some of you could me some infos about the setting
> which i have to do at the Yamaha (channels, etc.) and the setting for
> cakewalk.

As far as I know the default AN1x's setting gives you the channels 1 & 2 to
send and receive. First off all you should select the "Midi Ports" you'll
use (be shure that it's properly instaled):

***Tools>Midi Devices>(select the one you want to use for In & Out)Ok.

Then "import" the AN1x instrument definition to your cakewalk (if you don't
have it I may send by e-mail or you may get it at the list's e-group's
page):

***Tools>instruments>define>import>(select Yamaha)open>(select Yamaha
AN1x)Ok.

If you still having problems take a deep look at you cable. BTW, to sync the
Cakewalk clock to control the arpeggiator (for example) set the arp. tempo
to "Midi" (on my CS2x it's below 40bpm I assume that on th AN1x is the same)
then set Cakewalk to send its clock:

***Tools>Project Options>Midi Out>transmit Midi
Start/Continue/Stop/Clock>Ok.

> Oh, i only have the PC and my Yamaha an 1x connected with midi.
> just to let you know..

In fact it doesn't matter at all, if there's two devices on the same channel
they just shall respond to the same "info" at the same time, but you shall
experience som trouble when sending SysEx.

> thanks in advance

You're welcome..:-)

I hope it helps,
PinheadX.

well i don't mean to offend you at all but are you sure you have your midi
setup correctly?

do you have the OUT from the computer to the IN on the AN1x? and the OUT
from the AN1x to the IN of the computer?

just a thought, it's usually the simplest things that some people get hung up
on....


ash

I'm glad to know that..:-)
I didn't receive my AN1x yet so I'm not sure if I can help you out, but I
took a look at the page 22 (AN1x owner's manual) and it says that you may
select the layer mode pressing the "layer" button (the blue one on the side
of the edit matrix). Each time yoyu press it you'll get a different mode, I
think that's the way to make it to respond to 2 different channesl (I mean,
bi-timbral mode).

Hugs,
PinheadX.

> yes, i got it working :))) great thing. and thanks to you all.
> now i have to figure out how to use multi instruments.. i can use
> different channels
> but the instrument is always the same. i hope i ll figure that out :)
>
> René
>
>
> PinheadX wrote:
>
> > > hi there all.
> >
> > Hi!
> >
> > > i got myself a used Yamaha an 1x. Now i wanted to connect to my pc
> > and
> > > got problems with it.
> > > I pluged in the midi cable (in and out and into the pc) but the PC
> > > doesnt seem to be connected
> > > with the Yamaha. I am using Cakewalk and tried Logic Audio.
> > > Maybe the Midi Connection is broken, and thats why I got it at a
> > fair
> > > price.
> >
> > I had the same problem w/ my CS2x (but it was the cable...).
> >
> > > It would be great if some of you could me some infos about the
> > setting
> > > which i have to do at the Yamaha (channels, etc.) and the setting
> > for
> > > cakewalk.
> >
> > As far as I know the default AN1x's setting gives you the channels 1 &
> > 2 to
> > send and receive. First off all you should select the "Midi Ports"
> > you'll
> > use (be shure that it's properly instaled):
> >
> > ***Tools>Midi Devices>(select the one you want to use for In & Out)Ok.
> >
> > Then "import" the AN1x instrument definition to your cakewalk (if you
> > don't
> > have it I may send by e-mail or you may get it at the list's e-group's
> >
> > page):
> >
> > ***Tools>instruments>define>import>(select Yamaha)open>(select Yamaha
> > AN1x)Ok.
> >
> > If you still having problems take a deep look at you cable. BTW, to
> > sync the
> > Cakewalk clock to control the arpeggiator (for example) set the arp.
> > tempo
> > to "Midi" (on my CS2x it's below 40bpm I assume that on th AN1x is the
> > same)
> > then set Cakewalk to send its clock:
> >
> > ***Tools>Project Options>Midi Out>transmit Midi
> > Start/Continue/Stop/Clock>Ok.
> >
> > > Oh, i only have the PC and my Yamaha an 1x connected with midi.
> > > just to let you know..
> >
> > In fact it doesn't matter at all, if there's two devices on the same
> > channel
> > they just shall respond to the same "info" at the same time, but you
> > shall
> > experience som trouble when sending SysEx.
> >
> > > thanks in advance
> >
> > You're welcome..:-)
> >
> > I hope it helps,
> > PinheadX.
> >
> > -----------------------------------------------------------------------
> > [where you set the price]
> > -----------------------------------------------------------------------
> > Community email addresses:
> > Post message: AN1x-list@onelist.com
> > Subscribe: AN1x-list-subscribe@onelist.com
> > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > List owner: AN1x-list-owner@onelist.com
> >
> > Shortcut URL to this page:
> > http://www.onelist.com/community/AN1x-list
>
> --
> .oOo. http://shiva.mystical-paradise.de .oOo.
>
>
>
>
>
> Community email addresses:
> Post message: AN1x-list@onelist.com
> Subscribe: AN1x-list-subscribe@onelist.com
> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> List owner: AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/AN1x-list
>

I was right....select the "Dual" mode and you'll get the 2 scenes working on
different channels.:-)

PinheadX.

> yes, i got it working :))) great thing. and thanks to you all.
> now i have to figure out how to use multi instruments.. i can use
> different channels
> but the instrument is always the same. i hope i ll figure that out :)
>
> René
>
>
> PinheadX wrote:
>
> > > hi there all.
> >
> > Hi!
> >
> > > i got myself a used Yamaha an 1x. Now i wanted to connect to my pc
> > and
> > > got problems with it.
> > > I pluged in the midi cable (in and out and into the pc) but the PC
> > > doesnt seem to be connected
> > > with the Yamaha. I am using Cakewalk and tried Logic Audio.
> > > Maybe the Midi Connection is broken, and thats why I got it at a
> > fair
> > > price.
> >
> > I had the same problem w/ my CS2x (but it was the cable...).
> >
> > > It would be great if some of you could me some infos about the
> > setting
> > > which i have to do at the Yamaha (channels, etc.) and the setting
> > for
> > > cakewalk.
> >
> > As far as I know the default AN1x's setting gives you the channels 1 &
> > 2 to
> > send and receive. First off all you should select the "Midi Ports"
> > you'll
> > use (be shure that it's properly instaled):
> >
> > ***Tools>Midi Devices>(select the one you want to use for In & Out)Ok.
> >
> > Then "import" the AN1x instrument definition to your cakewalk (if you
> > don't
> > have it I may send by e-mail or you may get it at the list's e-group's
> >
> > page):
> >
> > ***Tools>instruments>define>import>(select Yamaha)open>(select Yamaha
> > AN1x)Ok.
> >
> > If you still having problems take a deep look at you cable. BTW, to
> > sync the
> > Cakewalk clock to control the arpeggiator (for example) set the arp.
> > tempo
> > to "Midi" (on my CS2x it's below 40bpm I assume that on th AN1x is the
> > same)
> > then set Cakewalk to send its clock:
> >
> > ***Tools>Project Options>Midi Out>transmit Midi
> > Start/Continue/Stop/Clock>Ok.
> >
> > > Oh, i only have the PC and my Yamaha an 1x connected with midi.
> > > just to let you know..
> >
> > In fact it doesn't matter at all, if there's two devices on the same
> > channel
> > they just shall respond to the same "info" at the same time, but you
> > shall
> > experience som trouble when sending SysEx.
> >
> > > thanks in advance
> >
> > You're welcome..:-)
> >
> > I hope it helps,
> > PinheadX.
> >
> > -----------------------------------------------------------------------
> > [where you set the price]
> > -----------------------------------------------------------------------
> > Community email addresses:
> > Post message: AN1x-list@onelist.com
> > Subscribe: AN1x-list-subscribe@onelist.com
> > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > List owner: AN1x-list-owner@onelist.com
> >
> > Shortcut URL to this page:
> > http://www.onelist.com/community/AN1x-list
>
> --
> .oOo. http://shiva.mystical-paradise.de .oOo.
>
>
>
>
>
> Community email addresses:
> Post message: AN1x-list@onelist.com
> Subscribe: AN1x-list-subscribe@onelist.com
> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> List owner: AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/AN1x-list
>

You're welcome again..:-)
But as far as I know to do what you want you'll have to use scene #1 as
patch #1 and scene #2 as patch #2....but I could be wrong since I don't have
it yet...

PinheadX.

> well, thanks alot for that info. but you are one step ahead :)
> i meant, like :
> channel 1 : instrument (patch) #1
> channel 2 : instrument (patch) #2
> etc.
> right now i can only have all 16 channels with 1 instrument. or switch
> my Yamaha to another channel but then i hear only one instrument.. well,
> i am a midi rookie. so :)
>
> René
>
>
> PinheadX wrote:
>
> >
> > I was right....select the "Dual" mode and you'll get the 2 scenes
> > working on
> > different channels.:-)
> >
> > PinheadX.
> >
> >
> > > yes, i got it working :))) great thing. and thanks to you all.
> > > now i have to figure out how to use multi instruments.. i can use
> > > different channels
> > > but the instrument is always the same. i hope i ll figure that out
> > :)
> > >
> > > René
> > >
> > >
> > > PinheadX wrote:
> > >
> > > > > hi there all.
> > > >
> > > > Hi!
> > > >
> > > > > i got myself a used Yamaha an 1x. Now i wanted to connect to my
> > pc
> > > > and
> > > > > got problems with it.
> > > > > I pluged in the midi cable (in and out and into the pc) but the
> > PC
> > > > > doesnt seem to be connected
> > > > > with the Yamaha. I am using Cakewalk and tried Logic Audio.
> > > > > Maybe the Midi Connection is broken, and thats why I got it at a
> >
> > > > fair
> > > > > price.
> > > >
> > > > I had the same problem w/ my CS2x (but it was the cable...).
> > > >
> > > > > It would be great if some of you could me some infos about the
> > > > setting
> > > > > which i have to do at the Yamaha (channels, etc.) and the
> > setting
> > > > for
> > > > > cakewalk.
> > > >
> > > > As far as I know the default AN1x's setting gives you the channels
> > 1 &
> > > > 2 to
> > > > send and receive. First off all you should select the "Midi Ports"
> >
> > > > you'll
> > > > use (be shure that it's properly instaled):
> > > >
> > > > ***Tools>Midi Devices>(select the one you want to use for In &
> > Out)Ok.
> > > >
> > > > Then "import" the AN1x instrument definition to your cakewalk (if
> > you
> > > > don't
> > > > have it I may send by e-mail or you may get it at the list's
> > e-group's
> > > >
> > > > page):
> > > >
> > > > ***Tools>instruments>define>import>(select Yamaha)open>(select
> > Yamaha
> > > > AN1x)Ok.
> > > >
> > > > If you still having problems take a deep look at you cable. BTW,
> > to
> > > > sync the
> > > > Cakewalk clock to control the arpeggiator (for example) set the
> > arp.
> > > > tempo
> > > > to "Midi" (on my CS2x it's below 40bpm I assume that on th AN1x is
> > the
> > > > same)
> > > > then set Cakewalk to send its clock:
> > > >
> > > > ***Tools>Project Options>Midi Out>transmit Midi
> > > > Start/Continue/Stop/Clock>Ok.
> > > >
> > > > > Oh, i only have the PC and my Yamaha an 1x connected with midi.
> > > > > just to let you know..
> > > >
> > > > In fact it doesn't matter at all, if there's two devices on the
> > same
> > > > channel
> > > > they just shall respond to the same "info" at the same time, but
> > you
> > > > shall
> > > > experience som trouble when sending SysEx.
> > > >
> > > > > thanks in advance
> > > >
> > > > You're welcome..:-)
> > > >
> > > > I hope it helps,
> > > > PinheadX.
> > > >
> > > >
> > -----------------------------------------------------------------------
> >
> > > > [where you set the price]
> > > >
> > -----------------------------------------------------------------------
> >
> > > > Community email addresses:
> > > > Post message: AN1x-list@onelist.com
> > > > Subscribe: AN1x-list-subscribe@onelist.com
> > > > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > > > List owner: AN1x-list-owner@onelist.com
> > > >
> > > > Shortcut URL to this page:
> > > > http://www.onelist.com/community/AN1x-list
> > >
> > > --
> > > .oOo. http://shiva.mystical-paradise.de .oOo.
> > >
> > >
> > >
> > >
> > >
> > > Community email addresses:
> > > Post message: AN1x-list@onelist.com
> > > Subscribe: AN1x-list-subscribe@onelist.com
> > > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > > List owner: AN1x-list-owner@onelist.com
> > >
> > > Shortcut URL to this page:
> > > http://www.onelist.com/community/AN1x-list
> > >
> >
> > -----------------------------------------------------------------------
> >
> > -----------------------------------------------------------------------
> > Community email addresses:
> > Post message: AN1x-list@onelist.com
> > Subscribe: AN1x-list-subscribe@onelist.com
> > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > List owner: AN1x-list-owner@onelist.com
> >
> > Shortcut URL to this page:
> > http://www.onelist.com/community/AN1x-list
>
> --
> .oOo. http://shiva.mystical-paradise.de .oOo.
>
>
>
> Community email addresses:
> Post message: AN1x-list@onelist.com
> Subscribe: AN1x-list-subscribe@onelist.com
> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> List owner: AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/AN1x-list
>

Rene,
Use the Scene Ctrl buttons (above the Ribbon Controller) to toggle
between the two scenes in a Dual Voice; then use the Rx Ch under
UTILITY/SETUP to set individual MIDI Channels for each Scene in your
Dual Voice. Your AN1x should now respond on both MIDI Channels.
It's
important to understand how the Layer options for Voices work when
using the AN!x as a bitimbral tone generator - otherwise you'll get
unexpected results. Dual Mode and Split Mode are the obvious choices
to begin with.

regards,
Jon

--- In AN1x-list@egroups.com, shiva <aragorn1998@g...> wrote:
> well, thanks alot for that info. but you are one step ahead :)
> i meant, like :
> channel 1 : instrument (patch) #1
> channel 2 : instrument (patch) #2
> etc.
> right now i can only have all 16 channels with 1 instrument. or
switch
> my Yamaha to another channel but then i hear only one instrument..
well,
> i am a midi rookie. so :)
>
> René
>
>
> PinheadX wrote:
>
> >
> > I was right....select the "Dual" mode and you'll get the 2 scenes
> > working on
> > different channels.:-)
> >
> > PinheadX.
> >
> >
> > > yes, i got it working :))) great thing. and thanks to you all.
> > > now i have to figure out how to use multi instruments.. i can
use
> > > different channels
> > > but the instrument is always the same. i hope i ll figure that
out
> > :)
> > >
> > > René
> > >
> > >
> > > PinheadX wrote:
> > >
> > > > > hi there all.
> > > >
> > > > Hi!
> > > >
> > > > > i got myself a used Yamaha an 1x. Now i wanted to connect
to my
> > pc
> > > > and
> > > > > got problems with it.
> > > > > I pluged in the midi cable (in and out and into the pc) but
the
> > PC
> > > > > doesnt seem to be connected
> > > > > with the Yamaha. I am using Cakewalk and tried Logic Audio.
> > > > > Maybe the Midi Connection is broken, and thats why I got it
at a
> >
> > > > fair
> > > > > price.
> > > >
> > > > I had the same problem w/ my CS2x (but it was the cable...).
> > > >
> > > > > It would be great if some of you could me some infos about
the
> > > > setting
> > > > > which i have to do at the Yamaha (channels, etc.) and the
> > setting
> > > > for
> > > > > cakewalk.
> > > >
> > > > As far as I know the default AN1x's setting gives you the
channels
> > 1 &
> > > > 2 to
> > > > send and receive. First off all you should select the "Midi
Ports"
> >
> > > > you'll
> > > > use (be shure that it's properly instaled):
> > > >
> > > > ***Tools>Midi Devices>(select the one you want to use for In &
> > Out)Ok.
> > > >
> > > > Then "import" the AN1x instrument definition to your cakewalk
(if
> > you
> > > > don't
> > > > have it I may send by e-mail or you may get it at the list's
> > e-group's
> > > >
> > > > page):
> > > >
> > > > ***Tools>instruments>define>import>(select Yamaha)open>(select
> > Yamaha
> > > > AN1x)Ok.
> > > >
> > > > If you still having problems take a deep look at you cable.
BTW,
> > to
> > > > sync the
> > > > Cakewalk clock to control the arpeggiator (for example) set
the
> > arp.
> > > > tempo
> > > > to "Midi" (on my CS2x it's below 40bpm I assume that on th
AN1x is
> > the
> > > > same)
> > > > then set Cakewalk to send its clock:
> > > >
> > > > ***Tools>Project Options>Midi Out>transmit Midi
> > > > Start/Continue/Stop/Clock>Ok.
> > > >
> > > > > Oh, i only have the PC and my Yamaha an 1x connected with
midi.
> > > > > just to let you know..
> > > >
> > > > In fact it doesn't matter at all, if there's two devices on
the
> > same
> > > > channel
> > > > they just shall respond to the same "info" at the same time,
but
> > you
> > > > shall
> > > > experience som trouble when sending SysEx.
> > > >
> > > > > thanks in advance
> > > >
> > > > You're welcome..:-)
> > > >
> > > > I hope it helps,
> > > > PinheadX.
> > > >
> > > >
> > ----------------------------------------------
-------------------------
> >
> > > > [where you set the price]
> > > >
> > ----------------------------------------------
-------------------------
> >
> > > > Community email addresses:
> > > > Post message: AN1x-list@onelist.com
> > > > Subscribe: AN1x-list-subscribe@onelist.com
> > > > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > > > List owner: AN1x-list-owner@onelist.com
> > > >
> > > > Shortcut URL to this page:
> > > > http://www.onelist.com/community/AN1x-list
> > >
> > > --
> > > .oOo. http://shiva.mystical-paradise.de .oOo.
> > >
> > >
> > >
> > >
> > >
> > > Community email addresses:
> > > Post message: AN1x-list@onelist.com
> > > Subscribe: AN1x-list-subscribe@onelist.com
> > > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > > List owner: AN1x-list-owner@onelist.com
> > >
> > > Shortcut URL to this page:
> > > http://www.onelist.com/community/AN1x-list
> > >
> >
> > ----------------------------------------------
-------------------------
> >
> > ----------------------------------------------
-------------------------
> > Community email addresses:
> > Post message: AN1x-list@onelist.com
> > Subscribe: AN1x-list-subscribe@onelist.com
> > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > List owner: AN1x-list-owner@onelist.com
> >
> > Shortcut URL to this page:
> > http://www.onelist.com/community/AN1x-list
>
> --
> .oOo. http://shiva.mystical-paradise.de .oOo.

Try setting up Cakewalk to use and listen to the ports of your audiocard
(onto which your an1 is connected)

shiva wrote:

> hi there all.
> i got myself a used Yamaha an 1x. Now i wanted to connect to my pc and
> got problems with it.
> I pluged in the midi cable (in and out and into the pc) but the PC
> doesnt seem to be connected
> with the Yamaha. I am using Cakewalk and tried Logic Audio.
> Maybe the Midi Connection is broken, and thats why I got it at a fair
> price.
>
> It would be great if some of you could me some infos about the setting
> which i have to do at the Yamaha (channels, etc.) and the setting for
> cakewalk.
>
> Oh, i only have the PC and my Yamaha an 1x connected with midi.
> just to let you know..
>
> thanks in advance
>
> René
>
>
>
> Community email addresses:
> Post message: AN1x-list@onelist.com
> Subscribe: AN1x-list-subscribe@onelist.com
> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> List owner: AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/AN1x-list